How Should the Adjustable Brake Pedal System Be Indexed After Repairing the Pedal Assembly on Ford Crown Victoria?

After repair, the adjustable pedal system should be indexed when the brake or accelerator pedal system has been fixed. Connect the drive cable, disconnect the adjustable pedal motor, and use the pedals to move indexing marks in line. Rewarrange the drive cable and be sure that both pedals are at least 50 mm apart with the accelerator being 50 mm lower than the brake.

How to service and repair the brake pedal assembly on Ford Crown Victoria?

To service the brake pedal assembly, steering wheel should be held, instrument panel should be removed and speed control switch must be deactivated. Un screw the parts, leaving the steering column shaft in place. Take off the brake pedal bracket and replace with a torque-specified bracket. Check brake switch position and operation of stoplights after putting back together.

OEM Ford Crown Victoria Brake Pedal

Brake Pedal Pad

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Pedals found

View related parts
Ford Crown Victoria Pedal Assembly Part Number: 9W7Z-2455-F
$102.06 MSRP: $141.19
You Save: $39.13 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pedal Assembly - Brake
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Ford Crown Victoria | Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Pedal Assembly Part Number: 9W7Z-2455-D
Product Specifications
- Other Name: Pedal Assembly - Brake
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2009 Ford Crown Victoria | Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Pedal Assembly Part Number: 6W7Z-2455-AA
Product Specifications
- Other Name: Pedal Assembly - Brake
- Manufacturer Note: Fixed foot pedals
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2006 Ford Crown Victoria | Base, Fleet, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Pedal Assembly Part Number: 5W7Z-2455-AA
Product Specifications
- Other Name: Pedal Assembly - Brake
- Manufacturer Note: Fixed foot pedals
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Crown Victoria | Base, Fleet, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

Ford Crown Victoria Brake Pedal

Welcome to our website where you can discover high-quality, genuine Ford Crown Victoria Brake Pedal. We offer an extensive inventory of OEM Ford Crown Victoria Brake Pedal at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Crown Victoria Brake Pedal Parts and Q&A

Pedal Assembly
5W7Z-2455-AA
Q: How Should the Adjustable Brake Pedal System Be Indexed After Repairing the Pedal Assembly on Ford Crown Victoria?
A: After repair, the adjustable pedal system should be indexed when the brake or accelerator pedal system has been fixed. Connect the drive cable, disconnect the adjustable pedal motor, and use the pedals to move indexing marks in line. Rewarrange the drive cable and be sure that both pedals are at least 50 mm apart with the accelerator being 50 mm lower than the brake.
Pedal Assembly
9W7Z-2455-F
Q: How to service and repair the brake pedal assembly on Ford Crown Victoria?
A: To service the brake pedal assembly, Steering Wheel should be held, instrument panel should be removed and speed control switch must be deactivated. Un screw the parts, leaving the steering column shaft in place. Take off the brake pedal bracket and replace with a torque-specified bracket. Check brake switch position and operation of stoplights after putting back together.