How to service and repair the front bumper cover (17D957) on Ford Crown Victoria?

The procedure for front bumper cover (17D957) servicing and repairing starts with bolt removal then bolt removal from the sides before moving to screw removal from the sides and cornering lamp assembly removal. The removal of the bolt from each side belongs to both the Grand Marquis and the Crown Victoria. However both vehicles require different fasteners for each side: the Grand Marquis uses bolts and the Crown Victoria uses screws. For separating the front bumper cover you must first remove the bolts from both sides and then release the four tabs will do so. The reverse procedure should be used when installing the bumper cover.

How to remove and replace the rear bumper cover on Ford Crown Victoria?

The removal process for a rear bumper cover demands first depowering the fire protection system to protect safety and switching off the air suspension electrical power to avoid air spring changes. Place the neutral-gear vehicle onto a safe hoist position. First detach all 2 bumper cover screws from the rear before moving onto the 2 additional screws and 2 pin-type retainers located on each side. Begin by removing 6 pin-type retainers divided into 3 pieces on each side and after that take out the pin-type retainers with the luggage compartment rear trim panel before setting the lining material to the side. You must extract the 4 rear bumper cover nuts from each side before installing the nuts with a torque of 7 Nm (62 lb-in). The rear bumper cover can be detached by removing six cover nuts, three each from the sides until cover removal is complete and reinstalling the cover using 7 Nm (62 lb-in) torque. The procedure concludes with the opposite order of removal operations.

OEM Ford Crown Victoria Bumper Cover

Bumper Shell

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Bumper Covers found

View related parts
Ford Crown Victoria Bumper Cover, Front Part Number: 3W7Z-17D957-CA
$237.80 MSRP: $326.27
You Save: $88.47 (28%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Manufacturer Note: Paint to match
- Position: Front
- Replaces: 1W7Z-17D957-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2005 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 4.6L V8, 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Bumper Cover, Rear Part Number: YW7Z-17K835-CA
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Replaces: F8AZ-17K835-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2005 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 4.6L V8, 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Bumper Cover, Rear Part Number: 6W7Z-17K835-APTM
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Bumper Cover, Front Part Number: 6W7Z-17D957-APTM
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

Ford Crown Victoria Bumper Cover

OEM Bumper Cover boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Bumper Cover with long life and a perfect fit. Come to our website and find genuine Ford Crown Victoria parts. We keep a wide inventory of OEM Crown Victoria parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Crown Victoria Bumper Cover enhances the look of your vehicle while providing protection for your bumper. The Bumper Cover, which is a soft body panel, hides the bumper, which is an impact-absorbing structure. It provides a finished look at the outer surface and may also help in streamlining airflow to increase speed and fuel economy. The Bumper Cover of a Ford full-size sedan like the Crown Victoria may be located at the front or rear as part of a larger bumper that may also include grille inserts, light bezels, and trim panels. The Bumper Cover has openings or molded spaces to allow air to pass through to the radiator or other coolers. It also has mounting points for fitting fog lights, license plates, parking sensors, or a tow-eye anchor that is covered by a removable cover. A Bumper Cover must be replaced if it is damaged to maintain protective ability and styling. Direct-fit units are sold individually, in sets, or as part of kits, allowing Crown Victoria owners to easily return their vehicle to factory look without demanding modifications. These paints match the Ford paint shades utilized in the Crown Victoria.

Ford Crown Victoria Bumper Cover Parts and Q&A

Bumper Cover, Front
3W7Z-17D957-CA
Q: How to service and repair the front bumper cover (17D957) on Ford Crown Victoria?
A:
The procedure for front bumper cover (17D957) servicing and repairing starts with bolt removal then bolt removal from the sides before moving to screw removal from the sides and cornering lamp assembly removal. The removal of the bolt from each side belongs to both the Grand Marquis and the Crown Victoria. However both vehicles require different fasteners for each side: the Grand Marquis uses bolts and the Crown Victoria uses screws. For separating the front bumper cover you must first remove the bolts from both sides and then release the four tabs will do so. The reverse procedure should be used when installing the bumper cover.
Bumper Cover, Rear
6W7Z-17K835-APTM
Q: How to remove and replace the rear bumper cover on Ford Crown Victoria?
A:
The removal process for a rear bumper cover demands first depowering the fire protection system to protect safety and switching off the Air Suspension electrical power to avoid air spring changes. Place the neutral-gear vehicle onto a safe hoist position. First detach all 2 bumper cover screws from the rear before moving onto the 2 additional screws and 2 pin-type retainers located on each side. Begin by removing 6 pin-type retainers divided into 3 pieces on each side and after that take out the pin-type retainers with the luggage compartment rear trim panel before setting the lining material to the side. You must extract the 4 rear bumper cover nuts from each side before installing the nuts with a torque of 7 Nm (62 lb-in). The rear bumper cover can be detached by removing six cover nuts, three each from the sides until cover removal is complete and reinstalling the cover using 7 Nm (62 lb-in) torque. The procedure concludes with the opposite order of removal operations.