How to service and repair the front bumper cover (part number l715957) on all on Ford Crown Victoria?

To maintain/repair front bumper cover (l715957) to all vehicles: remove side bolts, side screws, cornering lamp assemblies etc. Grand Marquis, take one bolt out on each side; Crown Victoria take one screw on each side. Then take a bolt off each side, a four tab release, and cover off. Removal is a reverse of installation.

How to service the rear bumper reinforcement on Ford Crown Victoria?

In order to install reinforcement to the rear bumper, begin by taking out the rear bumper cover (17K835) by unscrewing the nuts on each side of the rear bumper. Then, detach the rear bumper (17906). Installation is just a reversal of the process of removal.

OEM Ford Crown Victoria Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Bumpers found

View related parts
Ford Crown Victoria Reinforcement, Rear Part Number: F2AZ17906B
$215.99 MSRP: $293.93
You Save: $77.94 (27%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1994 Ford Crown Victoria | Base, LX, Police Interceptor, S, Touring Sedan | 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Impact Bar, Front Part Number: 4W7Z-17757-A
$79.82 MSRP: $116.18
You Save: $36.36 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front
- Manufacturer Note: Steel, FROM 12/1/03
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Bumper Cover, Rear Part Number: YW7Z-17K835-CA
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Replaces: F8AZ-17K835-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2005 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Bumper Cover, Rear Part Number: 6W7Z-17K835-APTM
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Impact Bar, Front Part Number: YW1Z-17757-AA
Product Specifications
- Other Name: Bumper Assembly - Front
- Manufacturer Note: Steel
- Position: Front
- Replaces: F8VZ-17757-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2002 Ford Crown Victoria | Base, LWB, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Bumper Cover, Front Part Number: 6W7Z-17D957-APTM
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Bumper Cover, Front Part Number: 3W7Z-17D957-CA
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Manufacturer Note: Paint to match
- Position: Front
- Replaces: 1W7Z-17D957-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2005 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Reinforcement, Rear Part Number: 3W7Z-17906-AA
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover Reinforcement Beam, Rear
- Manufacturer Note: (CP) Designates Crash Part - When Ordering Please Refer To Crash Part Truckload Program Guidelines
- Position: Rear
- Replaces: F8AZ-17906-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Impact Bar, Front Part Number: 3W7Z-17757-AA
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS

Ford Crown Victoria Bumper

Welcome to our website where you can discover high-quality, genuine Ford Crown Victoria Bumper. We offer an extensive inventory of OEM Ford Crown Victoria Bumper at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Crown Victoria Bumper Parts and Q&A

Bumper Cover, Front
3W7Z-17D957-CA
Q: How to service and repair the front bumper cover (part number l715957) on all on Ford Crown Victoria?
A: To maintain/repair front bumper cover (l715957) to all vehicles: remove side bolts, side screws, cornering lamp assemblies etc. Grand Marquis, take one bolt out on each side; Crown Victoria take one screw on each side. Then take a bolt off each side, a four tab release, and cover off. Removal is a reverse of installation.
Bumper Cover, Rear
YW7Z-17K835-CA
Q: How to service the rear bumper reinforcement on Ford Crown Victoria?
A: In order to install reinforcement to the rear bumper, begin by taking out the rear bumper cover (17K835) by unscrewing the nuts on each side of the rear bumper. Then, detach the rear bumper (17906). Installation is just a reversal of the process of removal.