OEM Ford Crown Victoria Transmission Pan

Ford Crown Victoria Transmission Pan Parts Questions & Experts Answers

• Oil Pan
  6L3Z-7A194-A
  Q: How to service and repair the Transmission Pan on a 4R70E/4R75E transmission on Ford Crown Victoria?

  A: Maintenance of the 4R70E/4R75E fluid pan must start by putting the vehicle in NEUTRAL position on a hoist. A safety precaution must depower the fire suppression system to minimize personal harm. The transmission fluid pan bolts need to be loosened to enable complete fluid drainage before removing the bolts and pan together with the gasket. The service requires gentle pulling action to take out the transmission fluid filter and seal followed by cleaning and examination of the fluid pan alongside its gasket and magnet. Users should remove old seals from the main control bore while keeping it intact when installing new filters. The use of fresh replacement parts is necessary if fundamental contamination exists during service otherwise the filter can maintain its utilization. First place the pan magnet into the fluid pan before installing the fluid pan together with its gasket and tightening bolts to 14 Nm (124 lb-in). Follow necessary safety procedures to repower a vehicle that features a fire suppression system. End the procedure by adding 4.7L (5 qt) of automatic transmission fluid until the correct fluid level is achieved.