How to service the Wiper Pivot and arm shaft on Ford Crown Victoria?

The service of wiper arm and pivot shaft requires you to start by taking out the cowl panel grille. Before installation, fasten the evaporative emission canister purge valve while it rests aside and place the two nuts at 6 Nm (53 lb-in). The wiper mounting arm and pivot shaft need six bolts removed for proper positioning before installation when bolts need to be tightened to 12 Nm (9 lb-ft). The windshield wiper motor electrical connector must be disconnected together with the two harness pushpins while detaching the windshield washer hose before separating the wiper mounting arm and pivot shaft. You should remove the wiper motor assembly at the end of this process after reversing the steps of removal.

OEM Ford Crown Victoria Wiper Pivot

Windshield Wiper Pivot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Pivots found

View related parts
Ford Crown Victoria Wiper Transmission
Part Number: 8W7Z-17566-A
Product Specifications
- Other Name: Arm And Pivot Shaft Assembly; Windshield Wiper Linkage; Wiper Linkage; Arm & Pivot Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Crown Victoria | Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Wiper Transmission
Part Number: 1W7Z-17566-AA
Product Specifications
- Other Name: Windscreen Wiper; Wiper Linkage; Linkage Assembly; Arm & Pivot Assembly
- Manufacturer Note: Does Not Include Motor
- Replaces: F2AZ-17566-B, F8AZ-17566-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-2002 Ford Crown Victoria | Base, LWB, LX, Police Interceptor, S, Touring Sedan | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS

Ford Crown Victoria Wiper Pivot

Welcome to our website where you can discover high-quality, genuine Ford Crown Victoria Wiper Pivot. We offer an extensive inventory of OEM Ford Crown Victoria Wiper Pivot at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Crown Victoria Wiper Pivot Parts Questions & Experts Answers

Wiper Transmission
8W7Z-17566-A
Q: How to service the Wiper Pivot and arm shaft on Ford Crown Victoria?
A: The service of Wiper Arm and pivot shaft requires you to start by taking out the cowl panel grille. Before installation, fasten the evaporative emission Canister Purge Valve while it rests aside and place the two nuts at 6 Nm (53 lb-in). The wiper mounting arm and pivot shaft need six bolts removed for proper positioning before installation when bolts need to be tightened to 12 Nm (9 lb-ft). The windshield Wiper Motor electrical connector must be disconnected together with the two harness pushpins while detaching the windshield washer hose before separating the wiper mounting arm and pivot shaft. You should remove the wiper motor assembly at the end of this process after reversing the steps of removal.