How to service and repair the oil pan on Ford E-150 Econoline?

Service and repair of the oil pan requires first disconnecting the battery ground cable followed by draining the cooling system. Begin by taking away the air cleaner assembly and subsequent removal of fan shroud and fan assembly before proceeding to detach the upper intake manifold. Remove the bolt which maintains the dipstick tube support bracket to the transmission converter housing. Rise the vehicle into the air then extract all engine oil. Support the engine by placing a screw jack with block wood under the oil pan before unscrewing and removing the nuts which are located on both pan sides. Engine elevation requires sufficient clearance of 330mm (13 inches) between engine crankshaft damper and the bottom point of crossmember. You should first separate the bolt which holds the oil pan to the right side of the transmission converter housing and then proceed with the left side bolts before removing all remaining bolts to remove the oil pan while discarding the oil pan seal. The oil pan along with rear oil seal must be installed within seven minutes otherwise the sealant needs to be removed and reapplied. Apply sealant to the mating surfaces of oil pan before cleaning them with metal surface cleaner. The bolt installation consists of two steps with tightening Torque values starting at 4 - 5 Nm (35 - 44 inch lbs.) before progressing to 9 - 12 Nm (79 - 106 inch lbs.). Follow the specific bolt sequence.

OEM Ford E-150 Econoline Oil Pan

Oil Drain Pan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Oil Pans found

View related parts
Ford E-150 Econoline Oil Pan Part Number: F7UZ-6675-AC
$97.86 MSRP: $142.45
You Save: $44.59 (32%)
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford E-150 Econoline | Base, XL | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Econoline Oil Pan Part Number: F65Z-6675-CB
$165.70 MSRP: $229.23
You Save: $63.53 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Manufacturer Note: 4 X 2
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997 Ford E-150 Econoline | Base, XL | 6 Cyl 4.2 L GAS
View related parts
Ford E-150 Econoline Oil Pan Part Number: 3L3Z-6675-CA
$83.51 MSRP: $128.52
You Save: $45.01 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Replaces: XL3Z-6675-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford E-150 Econoline | Base, XL | 6 Cyl 4.2 L GAS
View related parts
Ford E-150 Econoline Oil Pan Part Number: E7TZ6675E
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1985-1987 Ford E-150 Econoline | Base, Custom, XL | 8 Cyl 5.8 L GAS
View related parts
Ford E-150 Econoline Oil Pan Part Number: F6TZ-6675-NA
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Replaces: E8TZ-6675-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1988-1996 Ford E-150 Econoline | Base, Custom, XL | 8 Cyl 5.8 L GAS
View related parts
Ford E-150 Econoline Oil Pan Part Number: F6TZ-6675-MA
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1985-1996 Ford E-150 Econoline | Base, Custom, XL | 8 Cyl 5.0 L GAS
View related parts
Ford E-150 Econoline Oil Pan Part Number: F6TZ-6675-LA
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1985-1996 Ford E-150 Econoline | Base, Custom, XL | 6 Cyl 4.9 L GAS, 6 Cyl 4.9 L LPG

Ford E-150 Econoline Oil Pan

OEM Oil Pan boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Oil Pan with long life and a perfect fit. Come to our website and find genuine Ford E-150 Econoline parts. We keep a wide inventory of OEM E-150 Econoline parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford E-150 Econoline Oil Pan Parts and Q&A

Oil Pan
F7UZ-6675-AC
Q: How to service and repair the oil pan on Ford E-150 Econoline?
A:
Service and repair of the oil pan requires first disconnecting the battery ground cable followed by draining the cooling system. Begin by taking away the air cleaner assembly and subsequent removal of Fan Shroud and fan assembly before proceeding to detach the upper intake manifold. Remove the bolt which maintains the dipstick tube support bracket to the transmission converter housing. Rise the vehicle into the air then extract all engine oil. Support the engine by placing a screw jack with block wood under the oil pan before unscrewing and removing the nuts which are located on both pan sides. Engine elevation requires sufficient clearance of 330mm (13 inches) between engine crankshaft damper and the bottom point of crossmember. You should first separate the bolt which holds the oil pan to the right side of the transmission converter housing and then proceed with the left side bolts before removing all remaining bolts to remove the oil pan while discarding the oil pan seal. The oil pan along with rear oil seal must be installed within seven minutes otherwise the sealant needs to be removed and reapplied. Apply sealant to the mating surfaces of oil pan before cleaning them with metal surface cleaner. The bolt installation consists of two steps with tightening Torque values starting at 4 - 5 Nm (35 - 44 inch lbs.) before progressing to 9 - 12 Nm (79 - 106 inch lbs.). Follow the specific bolt sequence.