Start the windshield washer reservoir service and repair by lifting and holding the hood open followed by taking out the bolts that secure the battery and tray. The removal process begins with
Washer Pump and reservoir disassembly that requires turning off the nut and bolt and removing the filler hose and electrical connector while separating the wiring harness locator from the washer pump and reservoir before disconnecting the windshield washer hose. The windshield washer fluid should be transferred to a container when you detach the hose. Take out the washing pump from the reservoir after completion. To install these components follow the opposite order of removal while adding windshield washer fluid to the reservoir. Opening the filler port for windshield washer fluid should be performed after reservoir filling is complete since electrical connections and windshield pump usage must be avoided during fluid introduction. A vehicle will demonstrate unusual drive characteristics during adaptation after connecting and disconnecting the battery since it needs at least 16 km (10 mi) or more driving to establish proper adaptive control.