Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Rear Right; Outer Belt Assembly
Manufacturer Note: (-W*)
Position: Rear Passenger Side
Replaces: 8C2Z-39611B68-AB
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2008-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
| Page 1 of 4 |Next >
1-20 of 61 Results
Ford E-250 Seat Belt
Welcome to our website where you can discover high-quality, genuine Ford E-250 Seat Belt. We offer an extensive inventory of OEM Ford E-250 Seat Belt at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Ford E-250 Seat Belt Parts Questions & Experts Answers
Q: Is Your Rear 3-Passenger Bench Seat Belt Safe and Properly Installed on Ford E-250?
A: The inspection following any collision must include each seat belt assembly component starting from retractors through belt tension sensors (if equipped), buckles, shoulder belt height adjusters (if installed), child safety seats attachments, and their hardware. The installation of new belt assemblies becomes necessary unless qualified technicians validate the assemblies have no damage and function as intended. Inspection of unused assemblies together with new assembly installation is required after any collision to prevent increased collision-related injuries. After removing the bolt the LH rear seat belt and buckle assembly you should install new components and tighten them to 40 Nm (30 lb-ft). After taking out the bolt you should install the new parts for the RH rear seat belt buckle assembly and complete the operation by tightening it to 40 Nm (30 lb-ft). The seat belt webbing should remain untwisted before assembly and following the uninstallation steps will finish installation. Perform a check to validate proper operation of the active restraint system as the last step.