FordParts
My Garage
My Account
Cart
OEM Ford Edge Sunroof
Moonroof- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Sunroofs found
Ford Edge Sunroof Glass, Rear
Part Number: 7T4Z-18500A18-B$1713.04 MSRP: $2537.83You Save: $824.79 (33%)Ships in 1-3 Business Days
Ford Edge Sunroof Glass, Rear
Part Number: KT4Z-58500A18-A$699.67 MSRP: $1110.58You Save: $410.91 (37%)Ships in 1-3 Business Days
Ford Edge Sunroof Glass, Front
Part Number: 7T4Z-18500A18-A$583.70 MSRP: $864.73You Save: $281.03 (33%)Ford Edge Sunroof Glass, Rear
Part Number: JT4Z-58500A18-B$620.37 MSRP: $919.07You Save: $298.70 (33%)
Ford Edge Sunroof Glass, Front
Part Number: JT4Z-58500A18-A$675.10 MSRP: $1000.15You Save: $325.05 (33%)
Ford Edge Sunroof
Welcome to our website where you can discover high-quality, genuine Ford Edge Sunroof. We offer an extensive inventory of OEM Ford Edge Sunroof at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Ford Edge Sunroof Parts Questions & Experts Answers
- Q: How to service and repair the rear fixed sunroof panel glass on Ford Edge?A: The process of fixing or servicing the rear fixed roof opening panel glass starts by taking out the sliding glass roof panel, then the headliner followed by removal of the trim ring on the interior of the rear fixed glass. Eye protection and protective gloves should always be worn to avoid hazards during maintenance work. You must replace cutting blades because they protect both the body structure and the trim components during work. You should guide the blade of the Deluxe Windshield Removal Tool by placing its flat edge against the glass to preserve the urethane adhesive bead on the pinch weld. This allows a proper dry set of the new glass. Water application functions as an adhesive lubricant when working on urethane adhesive. Cut the urethane adhesive from the middle portion towards the glass front corners before continuing towards the window edges and back corners while being cautious to protect the trim seals. The newly installed glass should be fitted at the existing urethane adhesive bead position so alignment marks can be made for correct assembly. Cut the urethane adhesive until it reaches a 1-2 mm residue while maintaining total cleanliness of the water channel. For using original glass components you need to remove all surplus urethane adhesive then clean the glass surface. The glass primer requires an application in accordance with manufacturer instructions then needs at least 6 minutes of drying time. Cut the urethane adhesive applicator tip in the correct size then spread the adhesive across the trimmed bead while avoiding any gaps between the adhesive and trim. Above all do not operate the vehicle before the urethane adhesive reaches its curing completion point prescribed by the manufacturer since improper curing can result in poor glass stability. The vehicle should receive open windows before placing the glass panel because air pressure might impact the adhesive bond strength. Place the fixed glass panel assembly on the roof module with vertical pressure before installing the rear fixed glass interior ring and the headliner and the roof opening panel sliding glass.
