How to service and repair the Trunk Lid Lift Support on Ford Edge?

A service repair of the power liftgate rod requires the removal of the LH quarter trim panel access cover. Press the clip on the power liftgate rod to disengage it from the motor assembly then raise the rod assembly while freeing it away. The service team must remove the cover along with its retaining nut while using threadlock to treat all fastener threads before securing it at 11 Nm (97 lb-in). You must take out the three power liftgate rod mounting bracket nuts before installation although you should securely tighten them to 30 Nm (22 lb-ft). To install and activate the power liftgate execute the opposite instructions of the removal sequence.

OEM Ford Edge Trunk Lid Lift Support

Lift Strut Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Trunk Lid Lift Supports found

View related parts
Ford Edge Lift Cylinder, Rear Driver Side Part Number: 7T4Z-78406A11-A
$31.51 MSRP: $44.70
You Save: $13.19 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Liftgate Lift Support, Rear Left; Back Glass Lift Support; Tailgate Lift Support; Door Lift Support; Support Cylinder; Liftgate Lift Support; Lift Support
- Position: Rear Driver Side
- Replaces: BT4Z-78406A11-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford Edge | Limited, SE, SEL, SEL Plus, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Ford Edge Lift Cylinder, Rear Passenger Side Part Number: 7T4Z-78406A10-A
$29.29 MSRP: $41.55
You Save: $12.26 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Rear Right Liftgate Support; Back Glass Support; Tailgate Support; Door Support; Support Cylinder; Liftgate Lift Support; Lift Support
- Position: Rear Passenger Side
- Replaces: BT4Z-78406A10-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford Edge | Limited, SE, SEL, SEL Plus, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Ford Edge Lift Cylinder, Driver Side Part Number: FT4Z-58406A11-A
$53.05 MSRP: $75.90
You Save: $22.85 (31%)
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Hatch, Back Glass, Liftgate, Tailgate, and Door Lift Supports.; Support Cylinder; Lift Support
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2018 Ford Edge | SE, SEL, Sport, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Edge Damper Part Number: FT4Z-5806200-C
$41.49 MSRP: $59.35
You Save: $17.86 (31%)
ADD TO CART
Product Specifications
- Other Name: Stop; Glove Box Support
- Replaces: FT4Z-5806200-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2019 Ford Edge | SE, SEL, Sport, ST, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Edge Lift Cylinder, Passenger Side Part Number: FT4Z-58406A10-C
$159.83 MSRP: $232.65
You Save: $72.82 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Hatch, Back Glass, Liftgate, Tailgate, and Door Lift Supports.; Support Cylinder; Lift Support
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2018 Ford Edge | SEL, Sport, Titanium | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Edge Lift Cylinder Part Number: FT4Z-58406A10-B
$159.83 MSRP: $232.65
You Save: $72.82 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Hatch, Back Glass, Liftgate, Tailgate, and Door Lift Supports.; Support Cylinder; Lift Support
- Manufacturer Note: RH Only
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2018 Ford Edge | SEL, Sport, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Edge Lift Cylinder, Driver Side Part Number: KT4Z-58406A11-A
$45.83 MSRP: $65.57
You Save: $19.74 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Hatch, Back Glass, Liftgate, Tailgate, and Door Lift Supports.; Support Cylinder; Lift Support
- Position: Driver Side
- Replaces: FT4Z-58406A11-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2024 Ford Edge | SE | 4 Cyl 2.0 L GAS
View related parts
Ford Edge Lift Cylinder, Passenger Side Part Number: KT4Z-58406A10-B
$44.84 MSRP: $64.15
You Save: $19.31 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Hatch, Back Glass, Liftgate, Tailgate, and Door Lift Supports.; Support Cylinder; Lift Support
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2024 Ford Edge | SE | 4 Cyl 2.0 L GAS
View related parts
Ford Edge Support Cylinder, Passenger Side Part Number: FT4Z-58406A10-D
$54.86 MSRP: $78.48
You Save: $23.62 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Hatch Lift Support, Right; Liftgate Lift Support; Tailgate Lift Support; Lift Support
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018 Ford Edge | SE | 4 Cyl 2.0 L GAS
View related parts
Ford Edge Support Cylinder, Driver Side Part Number: KT4Z-58406A10-A
$163.16 MSRP: $237.50
You Save: $74.34 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Hatch Lift Support; Liftgate Lift Support; Tailgate Lift Support; Lift Support
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2024 Ford Edge | SEL, ST, ST-Line, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Edge Damper Part Number: JT4Z-5806200-A
$54.31 MSRP: $77.70
You Save: $23.39 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stop; Glove Box Support
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2024 Ford Edge | SE, SEL, ST, ST-Line, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Edge Lift Cylinder, Passenger Side Part Number: FT4Z-58406A10-A
$57.72 MSRP: $84.02
You Save: $26.30 (32%)
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Hatch, Back Glass, Liftgate, Tailgate, and Door Lift Supports.; Support Cylinder; Lift Support
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2023 Ford Edge | SE, SEL, ST, ST-Line, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS

Ford Edge Trunk Lid Lift Support

OEM Trunk Lid Lift Support boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Trunk Lid Lift Support with long life and a perfect fit. Come to our website and find genuine Ford Edge parts. We keep a wide inventory of OEM Edge parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Edge Trunk Lid Lift Support Parts and Q&A

Lift Cylinder, Rear Passenger Side
7T4Z-78406A10-A
Q: How to service and repair the Trunk Lid Lift Support on Ford Edge?
A:
A service repair of the power liftgate rod requires the removal of the LH quarter trim panel access cover. Press the clip on the power liftgate rod to disengage it from the motor assembly then raise the rod assembly while freeing it away. The service team must remove the cover along with its retaining nut while using threadlock to treat all fastener threads before securing it at 11 Nm (97 lb-in). You must take out the three power liftgate rod mounting bracket nuts before installation although you should securely tighten them to 30 Nm (22 lb-ft). To install and activate the power liftgate execute the opposite instructions of the removal sequence.