How to remove and replace the rear bumper cover on Ford Expedition?

The first step to replacing the rear bumper cover requires uninstalling the screws of the four left-hand and right-hand rear fender splash shields. Start by removing the four left-hand along with four right-hand inner bumper cover nuts. The electrical connector for the reverse parking aid must be removed when equipped. First remove the two pin-type retainers at the bottom of the rear bumper cover and afterward remove the cover itself by taking out the retainers and three bolts. Deploy the reverse procedure mentioned earlier to finish new bumper cover installation.

How to service and repair the front bumper cover on Ford Expedition?

Starting the front bumper cover repair requires you to remove the lower air deflector through pin-type retainers removal. First detach the front bumper cover lower pin-type retainers then separate front fender splash shield screws as well as bolts that unite the front fender to front bumper cover. Service technicians should first disconnect the fog lamp electrical connectors after they remove the upper air deflector by removing its pin-type retainers from the Expedition vehicles. You must first take out the two torx bolts which enable the release of front bumper cover clips and ultimately remove the front bumper cover. The fog lamp electrical connectors should be disconnected before releasing the front bumper cover clips and removing the front bumper for the Navigator model. The installation of the front bumper cover follows the opposite order of removal steps.

OEM Ford Expedition Bumper Cover

Bumper Shell

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

36 Bumper Covers found

View related parts
Ford Expedition Bumper Cover, Rear Part Number: 7L1Z-17K835-AA
$273.65 MSRP: $401.83
You Save: $128.18 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2017 Ford Expedition | Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Bumper Cover, Rear Part Number: 7L1Z-17K835-CA
$239.46 MSRP: $351.63
You Save: $112.17 (32%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2017 Ford Expedition | EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Bumper Cover, Rear Part Number: 7L1Z-17K835-BPTM
$264.42 MSRP: $388.28
You Save: $123.86 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Expedition | Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Bumper Cover, Rear Part Number: 7L1Z-17K835-DPTM
$272.80 MSRP: $400.58
You Save: $127.78 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford Expedition | EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Bumper Cover, Front Part Number: 2L1Z-17D957-KAA
$394.18 MSRP: $540.82
You Save: $146.64 (28%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford Expedition | XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Bumper Cover, Rear Part Number: BL1Z-17K835-GPTM
$370.54 MSRP: $445.31
You Save: $74.77 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2017 Ford Expedition | King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX
View related parts
Ford Expedition Bumper Cover, Rear Part Number: BL1Z-17K835-JPTM
$444.51 MSRP: $523.58
You Save: $79.07 (16%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2017 Ford Expedition | EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX
View related parts
Ford Expedition Bumper Cover, Rear Part Number: JL1Z-17K835-DB
$574.11 MSRP: $850.53
You Save: $276.42 (33%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover, Rear
- Position: Rear
- Replaces: JL1Z-17K835-DPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2021 Ford Expedition | Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Premium, XL, XLT | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Cover Part Number: SL1Z-17D957-BAPTM
$582.22 MSRP: $862.55
You Save: $280.33 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2025 Ford Expedition | Active, King Ranch, Max Active, Max King Ranch, Max Platinum, Max SSV, Platinum, SSV, Tremor | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Bumper Cover, Rear Part Number: JL1Z-17K835-BBPTM
$612.87 MSRP: $907.95
You Save: $295.08 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover, Rear
- Position: Rear
- Replaces: JL1Z-17K835-BPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2021 Ford Expedition | Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Premium, XL, XLT | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Cover Part Number: SL1Z-17K835-CAPTM
$631.88 MSRP: $936.12
You Save: $304.24 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2025 Ford Expedition | Max Active, Max King Ranch, Max Platinum, Max SSV | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Cover Part Number: SL1Z-17K835-DAPTM
$638.75 MSRP: $946.30
You Save: $307.55 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2025 Ford Expedition | Max Active, Max King Ranch, Max Platinum, Max SSV | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Bumper Cover Part Number: NL1Z-17K835-AAPTM
$729.46 MSRP: $1080.68
You Save: $351.22 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Replaces: NL1Z-17810-MAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Platinum, SSV, Timberline, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Cover Part Number: SL1Z-17D957-AAPTM
$781.17 MSRP: $1157.28
You Save: $376.11 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2025 Ford Expedition | Active, King Ranch, Max Active, Max King Ranch, Max Platinum, Max SSV, Platinum, SSV, Tremor | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Bumper Cover Part Number: NL1Z-17K835-BBPTM
$811.22 MSRP: $1201.80
You Save: $390.58 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Replaces: NL1Z-17810-MCPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Cover Part Number: SL1Z-17K835-AAPTM
$1086.45 MSRP: $1756.38
You Save: $669.93 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2025 Ford Expedition | Active, King Ranch, Max Active, Max King Ranch, Max Platinum, Max SSV, Platinum, SSV, Tremor | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Cover Part Number: SL1Z-17K835-BAPTM
$1151.81 MSRP: $1706.38
You Save: $554.57 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2025 Ford Expedition | Max Active, Max King Ranch, Max Platinum, Max SSV | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Bumper Cover, Charcoal Black, Rear Part Number: BL1Z-17K835-HA
$139.13 MSRP: $202.52
You Save: $63.39 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Charcoal Black
- Position: Rear
- Replaces: BL1Z-17K835-HPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2017 Ford Expedition | King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX
View related parts
Ford Expedition Bumper Cover, Charcoal Black, Rear Part Number: BL1Z-17K835-KA
$257.21 MSRP: $377.70
You Save: $120.49 (32%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Charcoal Black
- Position: Rear
- Replaces: BL1Z-17K835-KPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2017 Ford Expedition | EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX
View related parts
Ford Expedition Bumper Cover, Front Part Number: 4L1Z-17D957-HAA
$289.80 MSRP: $425.55
You Save: $135.75 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2006 Ford Expedition | Eddie Bauer, Limited, XLS, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

| Page 1 of 2 |Next >

1-20 of 36 Results

Ford Expedition Bumper Cover

OEM Bumper Cover boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Bumper Cover with long life and a perfect fit. Come to our website and find genuine Ford Expedition parts. We keep a wide inventory of OEM Expedition parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Expedition Bumper Cover is designed to serve as the outer piece that conceals the hard part of the bumper. The Expedition Bumper Cover improves the appearance of your vehicle while also enabling vehicle protection as well as airflow to the vehicle's radiators. The Bumper Cover fits with adjacent body panels, forming a smooth surface that may include molded pockets for fog lights, parking lights, turn signals, cornering lights, and vents directing air to the radiator or other heat exchangers, or towards the brakes. Decorative bezels, trim rings, and grille inserts can fill these cavities, while small removable covers conceal tow-eye anchor or unutilized light spaces to ensure uniformity of styling in the absence of certain electrical equipment. The seamless design assists in optimizing aerodynamics, which can result in improved speed and fuel economy. A collision, wear and tear, or even debris on the road can crack or discolour the panel, making it essential to replace it to restore the appearance and the airflow path that the panel allows for. The replacement of Bumper Cover cost varies with the provision of components and contents of kit and body type. Ford owners can match specific Expedition configurations, while the exact-fit Bumper Cover helps keep the Ford exterior cohesive.

Ford Expedition Bumper Cover Parts and Q&A

Bumper Cover, Rear
7L1Z-17K835-CA
Q: How to remove and replace the rear bumper cover on Ford Expedition?
A:
The first step to replacing the rear bumper cover requires uninstalling the screws of the four left-hand and right-hand rear fender splash shields. Start by removing the four left-hand along with four right-hand inner bumper cover nuts. The electrical connector for the reverse parking aid must be removed when equipped. First remove the two pin-type retainers at the bottom of the rear bumper cover and afterward remove the cover itself by taking out the retainers and three bolts. Deploy the reverse procedure mentioned earlier to finish new bumper cover installation.
Bumper Cover, Front
2L1Z-17D957-KAA
Q: How to service and repair the front bumper cover on Ford Expedition?
A:
Starting the front bumper cover repair requires you to remove the lower Air Deflector through pin-type retainers removal. First detach the front bumper cover lower pin-type retainers then separate front Fender splash shield screws as well as bolts that unite the front fender to front bumper cover. Service technicians should first disconnect the fog lamp electrical connectors after they remove the upper air deflector by removing its pin-type retainers from the Expedition vehicles. You must first take out the two torx bolts which enable the release of front bumper cover clips and ultimately remove the front bumper cover. The fog lamp electrical connectors should be disconnected before releasing the front bumper cover clips and removing the front bumper for the Navigator model. The installation of the front bumper cover follows the opposite order of removal steps.