What Are the Key Safety and Disposal Considerations for the TPMS Sensor on Ford Expedition?

The TPMS sensor contains a Lithium-ion battery that produces dangerous substances when it sustains severe mechanical harm. If this scenario arises you must flush the affected areas with water for 15 minutes before seeking emergency medical care. You should immediately contact a physician whenever anyone swallows a battery. TPMS sensors need to be disposed following specific hazardous material disposal procedures because they exist in different color variations based on their usage and the replacement needs to use sensors of matching colors since different sensor colors cannot operate interchangeably. The sensor removal process happens without requiring the strap or cradle to be separated from each other. Start the replacement process by taking the wheel at a tire while ensuring you do not utilize a big screwdriver and exercising gentleness to prevent harming the sensor locking clip. A pocket screwdriver works best to separate the sensor locking clip from the cradle after which you should disconnect the sensor before proceeding with removing the entire component. To correctly position the sensor inside the cradle you must push it all the way in until it clicks into place. Check the sensor position for proper seating before inserting a new locking clip. The orientation of the clip matters for correct insertion and full insertion should be possible when the sensor is properly situated. A fresh TPMS sensor arrives in battery saver condition so you need to activate it by fitting the wheel with tire and filling it with the recommended pressure level. Sensor training should begin only after waiting two minutes has elapsed.

How Should You Service the TPMS Sensor to Ensure Proper Installation and Functionality on Ford Expedition?

It is necessary to check that the new TPMS sensor has the same color as the previously removed sensor since sensors from different batches are not compatible. You can replace and install the sensor by maintaining the strap and cradle during removal and replacement and the sensor uses a Lithium-ion battery that needs correct disposal. Start the procedure by removing the tire from the wheel yet take caution against heavy-duty screwdriver use while using light force to protect the locking clip from damage. Make use of a pocket screwdriver or equivalent tool to unharness the sensor from its cradle and locking clip correctly before taking out the sensor itself. Check that the sensor seats entirely within the cradle before assembly because the correct installation produces a distinctive "click" sound. Insert a new locking clip into the sensor slot while maintaining correct orientation until it fits completely unless the sensor position is off. Place the tire on its wheel and then activate the new tire pressure sensor by installing it on a wheel and tightening the tire with recommended pressure while the sensor activates itself out of battery saver mode. The sensor training process can begin only after waiting for two minutes.

OEM Ford Expedition TPMS Sensor

Tire Pressure Monitoring System Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 TPMS Sensors found

View related parts
Ford Expedition TPMS Sensor Part Number: 4L2Z-1A150-BB
$49.90 MSRP: $83.62
You Save: $33.72 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Tpms Sensor; Tire Pressure Monitoring System (TPMS) Sensor; TPMS Sensor Service Kit; Tire Sensor; Pressure Sensor; Monitor; Sensor
- Replaces: TPMS-1, 4L2Z-1A150-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2006 Ford Expedition | Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Tire Pressure Sensor Part Number: 6F2Z-1A193-G
$20.60 MSRP: $32.71
You Save: $12.11 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Sensor Attachment; Tire Pressure Monitoring System (TPMS) Sensor Mounting Band; Service Kit; Sensor Ring; TPMS Sensor Strap; Strap
- Manufacturer Note: 20" Wheels
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Tire Pressure Sensor Part Number: 6F2Z-1A193-E
$20.60 MSRP: $32.71
You Save: $12.11 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Kit - Sensor Attachment; Tire Pressure Monitoring System (TPMS) Sensor Mounting Band; Service Kit; Sensor Ring; TPMS Sensor Strap; Pressure Sensor Strap; Strap
- Manufacturer Note: 18" Wheels
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Tire Pressure Sensor Part Number: 6F2Z-1A193-D
$20.60 MSRP: $32.71
You Save: $12.11 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Sensor Attachment; Tire Pressure Monitoring System (TPMS) Sensor Mounting Band; Service Kit; TPMS Sensor Strap; Pressure Sensor Strap; Strap; Sensor
- Manufacturer Note: 17" Wheels
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition TPMS Sensor Part Number: BB5Z-1A189-A
$49.90 MSRP: $83.62
You Save: $33.72 (41%)
ADD TO CART
Product Specifications
- Other Name: Kit - TPMS Sensor; Tire Pressure Monitoring System Service Kit; Tpms Capteur; Tire Pressure Sensor
- Replaces: DV6Z-1A189-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2017 Ford Expedition | EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX
View related parts
Ford Expedition TPMS Sensor Part Number: 9L3Z-1A189-A
$50.82 MSRP: $83.62
You Save: $32.80 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Kit - TPMS Sensor; Tire Pressure Monitoring System Service Kit; Tire Pressure Sensor; Pressure Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2017 Ford Expedition | EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX
View related parts
Ford Expedition TPMS Sensor Part Number: 7L1Z-1A189-A
$50.82 MSRP: $83.62
You Save: $32.80 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Tire Pressure Monitor; Tire Pressure Monitoring System (TPMS) Sensor; TPMS Sensor Service Kit; Tire Pressure Sensor; Pressure Sensor; Sensor Assembly - Tyre Pressure Monitor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition TPMS Sensor Part Number: ML3Z-1A189-D
$52.66 MSRP: $83.62
You Save: $30.96 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - TPMS Sensor; Tire Pressure Monitoring System Service Kit; Tire Pressure Sensor
- Replaces: TPMS-101, ML3Z-1A189-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition TPMS Sensor, Front Part Number: HC3Z-1A189-F
$52.66 MSRP: $83.62
You Save: $30.96 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Kit - TPMS Sensor; Tire Pressure Monitoring System Sensor, Front.; Tire Pressure Sensor
- Position: Front
- Replaces: HC3Z-1A189-B, TPMS-43, HC3Z-1A189-A, TPMS-42
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2021 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition TPMS Sensor Part Number: F2GZ-1A189-G
$52.66 MSRP: $83.62
You Save: $30.96 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - TPMS Sensor; Tire Pressure Monitoring System Service Kit; Tire Pressure Sensor
- Replaces: F2GZ-1A189-F, TPMS-46, F2GZ-1A189-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2021 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition TPMS Sensor Part Number: PR3Z-1A189-A
Product Specifications
- Other Name: Kit - Tpms Sensor; Tire Pressure Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS

Ford Expedition TPMS Sensor

OEM TPMS Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get TPMS Sensor with long life and a perfect fit. Come to our website and find genuine Ford Expedition parts. We keep a wide inventory of OEM Expedition parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Expedition TPMS Sensor is a critical device that allows the Ford famous full-size SUV to be safe and efficient. It is specifically to provide real-time or consistent details on tire pressure; the TPMS Sensor necessary informs drivers on pressure that is either too high or too low to boost safe driving. Every Ford Expedition comes with its own unique TPMS Sensor for each tire; these sensors are sold separately astyles or as a full set, to fit all Expedition models. The vehicle under study, Ford Expedition, is equipped with both basic permanent TPMS as well as enhanced TPMS, iTPMS and dTPMS, where the later utilizes original instruments to read the pressure with no indirect data, making this vehicle one of the most sought after in the automotive market. The quality and durability of the Ford Expedition TPMS Sensor easy to identify from this expiry edition so as to enhance the reputation of the car as it is known to have the potential to benefit from long lasting parts. This sensor gives a great contribution to the feel of the driving as it helps in achieving the premier performance of the tires as well as it is an important element for fuel economy because referred tires have less rolling. Besides, the Ford Expedition TPMS Sensor also has flexibility to adapt the diverse driving conditions and this makes the drivers to have confidence with it. Safety and innovative performance has been a fundamental kind of assurance that Ford has embraced when designing the ford expedition TPMS sensor is therefore an absolute necessity needed by any expedition car owner.

Ford Expedition TPMS Sensor Parts and Q&A

TPMS Sensor
7L1Z-1A189-A
Q: What Are the Key Safety and Disposal Considerations for the TPMS Sensor on Ford Expedition?
A:
The TPMS sensor contains a Lithium-ion battery that produces dangerous substances when it sustains severe mechanical harm. If this scenario arises you must flush the affected areas with water for 15 minutes before seeking emergency medical care. You should immediately contact a physician whenever anyone swallows a battery. TPMS sensors need to be disposed following specific hazardous material disposal procedures because they exist in different color variations based on their usage and the replacement needs to use sensors of matching colors since different sensor colors cannot operate interchangeably. The sensor removal process happens without requiring the strap or cradle to be separated from each other. Start the replacement process by taking the wheel at a tire while ensuring you do not utilize a big screwdriver and exercising gentleness to prevent harming the sensor locking clip. A pocket screwdriver works best to separate the sensor locking clip from the cradle after which you should disconnect the sensor before proceeding with removing the entire component. To correctly position the sensor inside the cradle you must push it all the way in until it clicks into place. Check the sensor position for proper seating before inserting a new locking clip. The orientation of the clip matters for correct insertion and full insertion should be possible when the sensor is properly situated. A fresh TPMS sensor arrives in battery saver condition so you need to activate it by fitting the wheel with tire and filling it with the recommended pressure level. Sensor training should begin only after waiting two minutes has elapsed.
Tire Pressure Sensor
6F2Z-1A193-G
Q: How Should You Service the TPMS Sensor to Ensure Proper Installation and Functionality on Ford Expedition?
A:
It is necessary to check that the new TPMS sensor has the same color as the previously removed sensor since sensors from different batches are not compatible. You can replace and install the sensor by maintaining the strap and cradle during removal and replacement and the sensor uses a Lithium-ion battery that needs correct disposal. Start the procedure by removing the tire from the wheel yet take caution against heavy-duty screwdriver use while using light force to protect the locking clip from damage. Make use of a pocket screwdriver or equivalent tool to unharness the sensor from its cradle and locking clip correctly before taking out the sensor itself. Check that the sensor seats entirely within the cradle before assembly because the correct installation produces a distinctive "click" sound. Insert a new locking clip into the sensor slot while maintaining correct orientation until it fits completely unless the sensor position is off. Place the tire on its wheel and then activate the new tire pressure sensor by installing it on a wheel and tightening the tire with recommended pressure while the sensor activates itself out of battery saver mode. The sensor training process can begin only after waiting for two minutes.