How to service and repair the front cross-member and rear crossmember on Ford F-250 Super Duty?

To begin the service or repair process of the transmission support crossmember start by implementing vehicle elevation along with support before disconnecting the electrical connection from the transmission support crossmember. First support the transmission before removing its insulator nuts then unfasten the gusset bolts that mount the gusset to the frame. Then you should take out the gusset by first removing the nuts and bolts which hold it to the transmission support crossmember. Remove the transmission support crossmember nuts and bolts from both the right-hand (RH) and left-hand (LH) sides by placing the lines correctly before starting. Installation starts with placing the transmission support crossmember in position then installing loosely the nuts and bolts on the LH side followed by the RH side. Use 90 Nm force (67 lb-ft) to tighten LH side nuts before installing loosely the gusset retaining nuts and bolts to the transmission support crossmember and frame. The technician first tightens the transmission support gusset to the frame with 90 Nm torque (67 lb-ft) before securing the RH side fasteners similarly to 90 Nm torque (67 lb-ft) and finally torques the gusset retaining bolts to the transmission support crossmember to 90 Nm (67 lb-ft). New transmission support insulator nuts should be installed before tightening them to 103 Nm (76 lb-ft). To complete the procedure detach the support from the transmission then you can reattach the electrical connection to the transmission support crossmember and finally lower the vehicle.

OEM Ford F-250 Super Duty Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

47 Front Cross-Members found

View related parts
Ford F-250 Super Duty Frame Assembly Part Number: PC3Z-5005-F
$4509.97 MSRP: $6681.43
You Save: $2171.46 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | Lariat, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Front Frame Part Number: NC3Z-5019-A
$3977.15 MSRP: $5892.07
You Save: $1914.92 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame Assembly
- Replaces: JC3Z-5019-B, HC3Z-5019-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: PC3Z-5005-G
$6320.30 MSRP: $9363.40
You Save: $3043.10 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: PC3Z-5005-AX
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: PC3Z-5005-AH
$4616.12 MSRP: $6838.70
You Save: $2222.58 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: PC3Z-5005-AU
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | Lariat, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: PC3Z-5005-L
$5213.90 MSRP: $7724.30
You Save: $2510.40 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: PC3Z-5005-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: PC3Z-5005-A
$3839.42 MSRP: $5688.03
You Save: $1848.61 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: PC3Z-5005-AQ
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Front Frame Part Number: PC3Z-5019-G
$3767.55 MSRP: $5581.55
You Save: $1814.00 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: GC3Z-5005-VX
$1687.69 MSRP: $2500.28
You Save: $812.59 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame Rail
- Replaces: DC3Z-5005-FF, FC3Z-5005-FF, GC3Z-5005-F, BC3Z-5005-EE, BC3Z-5005-E, FC3Z-5005-F, DC3Z-5005-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2016 Ford F-250 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: NC3Z-5005-F
$3774.23 MSRP: $5591.45
You Save: $1817.22 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame Rail
- Replaces: LC3Z-5005-U, LC3Z-5005-CC, HC3Z-5005-BA, HC3Z-5005-G, HC3Z-5005-CC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-250 Super Duty | Lariat, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: NC3Z-5005-B
$3012.91 MSRP: $4463.57
You Save: $1450.66 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: HC3Z-5005-A, HC3Z-5005-AT, LC3Z-5005-BY, LC3Z-5005-Q, HC3Z-5005-BY
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-250 Super Duty | XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Front Frame Part Number: PC3Z-5019-F
$3439.18 MSRP: $5095.08
You Save: $1655.90 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Front Frame Part Number: LC3Z-5019-A
$4977.02 MSRP: $7373.37
You Save: $2396.35 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame Assembly
- Replaces: HC3Z-5019-A, JC3Z-5019-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: PC3Z-5005-E
$4498.98 MSRP: $6665.15
You Save: $2166.17 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: PC3Z-5005-AV
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | Lariat, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: NC3Z-5005-E
$3818.93 MSRP: $5657.67
You Save: $1838.74 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame Rail
- Replaces: HC3Z-5005-BS, LC3Z-5005-CB, LC3Z-5005-T, HC3Z-5005-CB, HC3Z-5005-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2019 Ford F-250 Super Duty | Lariat, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: NC3Z-5005-J
$3937.05 MSRP: $5832.67
You Save: $1895.62 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame Rail
- Replaces: HC3Z-5005-CF, LC3Z-5005-X, LC3Z-5005-CG, HC3Z-5005-M, HC3Z-5005-CG
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: NC3Z-5005-K
$3892.76 MSRP: $5767.05
You Save: $1874.29 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: LC3Z-5005-CH, HC3Z-5005-CH, LC3Z-5005-Y
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: PC3Z-5005-K
$3940.70 MSRP: $5838.07
You Save: $1897.37 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: PC3Z-5005-AN
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: PC3Z-5005-B
$4453.86 MSRP: $6598.32
You Save: $2144.46 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: PC3Z-5005-BJ
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: PC3Z-5005-H
$4095.81 MSRP: $6067.87
You Save: $1972.06 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: PC3Z-5005-AY
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Frame Assembly Part Number: PC3Z-5005-D
$3993.30 MSRP: $5916.00
You Save: $1922.70 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: PC3Z-5005-AT
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | Lariat, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS

| Page 1 of 3 |Next >

1-20 of 47 Results

Ford F-250 Super Duty Front Cross-Member

OEM Front Cross-Member boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Front Cross-Member with long life and a perfect fit. Come to our website and find genuine Ford F-250 Super Duty parts. We keep a wide inventory of OEM F-250 Super Duty parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

As a crucial component the Ford F-250 Super Duty Front Cross-Member extends both the performance quality and reliability features of the vehicle. The Front Cross-Member builds its strength from high-strength steel and provides essential engine and transmission support that enables stable handling for operation. The Ford F-250 Super Duty depends on this component to preserve its alignment and structural integrity so it performs better safely. Various F-250 Super Duty models including Regular Cab and Super Cab and Crew Cab possess compatibility with the Front Cross-Member because it achieves high-load acceptance for heavy-duty applications. The special shaped Front Cross-Member shows unmatched ability to absorb torsional loads while staying firm against any deflection that affects vehicle performance. The Ford F-250 Super Duty has improved its design through time by implementing better powertrains and more effective materials which strengthen the Front Cross-Member role as an essential component for maintaining vehicle operation. The Front Cross-Member enhances driving performance through its specialized elements and its combination with top-notch suspension components and cabin elements. In the automotive market the Ford F-250 Super Duty Front Cross-Member establishes itself through its essential role that supports safety measures as well as performance and reliable features.

Ford F-250 Super Duty Front Cross-Member Parts and Q&A

Front Crossmember
5C3Z-5C128-AA
Q: How to service and repair the front cross-member and rear crossmember on Ford F-250 Super Duty?
A:
To begin the service or repair process of the transmission support crossmember start by implementing vehicle elevation along with support before disconnecting the electrical connection from the transmission support crossmember. First support the transmission before removing its insulator nuts then unfasten the gusset bolts that mount the gusset to the frame. Then you should take out the gusset by first removing the nuts and bolts which hold it to the transmission support crossmember. Remove the transmission support crossmember nuts and bolts from both the right-hand (RH) and left-hand (LH) sides by placing the lines correctly before starting. Installation starts with placing the transmission support crossmember in position then installing loosely the nuts and bolts on the LH side followed by the RH side. Use 90 Nm force (67 lb-ft) to tighten LH side nuts before installing loosely the gusset retaining nuts and bolts to the transmission support crossmember and frame. The technician first tightens the transmission support gusset to the frame with 90 Nm torque (67 lb-ft) before securing the RH side fasteners similarly to 90 Nm torque (67 lb-ft) and finally torques the gusset retaining bolts to the transmission support crossmember to 90 Nm (67 lb-ft). New transmission support insulator nuts should be installed before tightening them to 103 Nm (76 lb-ft). To complete the procedure detach the support from the transmission then you can reattach the electrical connection to the transmission support crossmember and finally lower the vehicle.