The front door window motor requires de-initialization once the motor is detached from the
Window Regulator drum housing or the installation of new components like window regulator, window glass or top run or any application of grease or lubricants on the window regulator or glass run. The service starts with removing both the front door regulator assembly along with its motor. Start by disassembling the regulator motor through removal of its three retaining screws then proceed by removing the motor component. The installation of the new or original LF window regulator motor should be done by following the exact opposite steps used for removal. Install an initialization process for any new motor while permitting first the de-initialization of an original motor before initiating the window regulator motor.