How to service the front door window regulator and power window motor on Ford Flex?

The service procedure of front door window motors requires de-initialization of the LF window motor in three situations; when the motor leaves the window regulator drum housing, after new window regulator installation, or when installing new window glass or top run, or when lubricating the window regulator or glass run. The customer should start by uninstalling the window control switch before the front door speaker and should set the water shield to the side. Install only the window control switch temporarily to let the window glass down while you access the locking tabs of the glass-to-regulator clamp. A suitable tool enables you to press each locking tab while lifting the glass upwards to separate it from the regulator clamp easily. To achieve proper clamping the glass should be pressed downward until it generates an audible notification that demonstrates correct seating. Begin by taping the window at its highest position before disconnecting the motor electrical connector and removing the fasteners and motor assembly while tightening the fasteners to 11 Nm (97 lb-in). The reverse removal steps must be used for installation alongside new LF window regulator and motor initializations but the original LF window motor will need to be both de-initialized then initialized.

OEM Ford Flex Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Window Regulators found

View related parts
Ford Flex Window Regulator, Rear Driver Side Part Number: 8A8Z-7427009-A
$100.00 MSRP: $158.80
You Save: $58.80 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Window - Less Motor; Window Regulator, Rear Left
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2019 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Window Regulator, Front Passenger Side Part Number: 8A8Z-7423208-A
$120.79 MSRP: $191.80
You Save: $71.01 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Window - Less Motor; Window Regulator, Front Right
- Manufacturer Note: Less Motor
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2019 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Window Regulator, Front Driver Side Part Number: 8A8Z-7423209-A
$130.06 MSRP: $214.00
You Save: $83.94 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Window - Less Motor; Window Regulator, Front Left
- Manufacturer Note: Less Motor
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2019 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Window Regulator, Rear Passenger Side Part Number: 8A8Z-7427008-A
$100.00 MSRP: $158.80
You Save: $58.80 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Window - Less Motor; Window Regulator, Rear Right
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2019 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS

Ford Flex Window Regulator

OEM Window Regulator boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Window Regulator with long life and a perfect fit. Come to our website and find genuine Ford Flex parts. We keep a wide inventory of OEM Flex parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Flex Window Regulator is an important part that makes a lot of differences in enriching the Ford Flex automobiles. As any Flex model owner would know, this Window Regulator is esteemed for managing the efficient up and down movement of the vehicle's windows, using an electric motor mechanism or a crank - based on the vehicle model. These Ford Flex Window Regulators are developed with strict requirements in mind and are guaranteed to fit and function as the factory-fitted ones. Its compatibility covers different ford flex models and as such it is relevant in maintaining the Ford Flex efficiency as well as its safety. Sometimes, the Windows Regulator becomes worn out due to frequent use since it is frequently in contact with the windowini and as a result it hampers with the operation of the window; therefore it needs to be replaced on time. SOME OF THE NEW DESIGNATION OF THE FORD FLEX WINDOW REGULATOR ARE SCISSOR AND CABLE MECHANISM THAT ARE USED IN THE CONSTRUCTION OF THE PART AND INFLUENCE THE OVERALL DURABILITY AND SERVICE LIFE OF THE PRODUCT. Also, the Ericsson db 320 embraces some features that distinguish it from other automobiles in the market: noise reduction, enhanced stability, thereby providing safe and quiet transportation of passengers. Whether it relates to the car's performance or the overall comfort, the Ford Flex Window Regulator complements the Ford Flex in a way that adds to the car's functional and solid image. Thus, the Ford Flex Window Regulator can be referred to as one of the most significant parts that prove the commitment of Ford Flex to efficient, safe, and high-performing vehicles.

Ford Flex Window Regulator Parts and Q&A

Window Regulator, Front Passenger Side
8A8Z-7423208-A
Q: How to service the front door window regulator and power window motor on Ford Flex?
A:
The service procedure of front door window motors requires de-initialization of the LF window motor in three situations; when the motor leaves the window regulator drum housing, after new window regulator installation, or when installing new window glass or top run, or when lubricating the window regulator or glass run. The customer should start by uninstalling the window control switch before the front door speaker and should set the water shield to the side. Install only the window control switch temporarily to let the window glass down while you access the locking tabs of the glass-to-regulator clamp. A suitable tool enables you to press each locking tab while lifting the glass upwards to separate it from the regulator clamp easily. To achieve proper clamping the glass should be pressed downward until it generates an audible notification that demonstrates correct seating. Begin by taping the window at its highest position before disconnecting the motor electrical connector and removing the fasteners and motor assembly while tightening the fasteners to 11 Nm (97 lb-in). The reverse removal steps must be used for installation alongside new LF window regulator and motor initializations but the original LF window motor will need to be both de-initialized then initialized.