How to Service and Repair Automatic Transmission Shift Levers on Ford Focus?

Start service and repair of the automatic transmission shifter by covering the vise jaw with vise jaw protectors. Rephrase the following sentence. The shifter service requires disconnecting the overdrive (O/D) switch electrical connector followed by removing the automatic transmission shift lever knob through its screw. To start the disassembly process of the automatic transmission shift lever, pull off the tappet before unclipping the bezel. The wiring harness needs to be located in front of the shift lever shaft with a centered position before installing the automatic transmission shift lever knob to protect the shift lever components and harness from damage. End with the disassembly sequence while applying grease to every sliding aspect as well as turning components.

How to Remove and Replace Automatic Transmission Shift Levers on Ford Focus?

A floor console removal is needed as the first step when handling automatic transmission shift levers replacement. First set the shift lever to PARK position before unclipping the shift lever cable and then removing its outer sleeve. First disconnect the shift lever assembly electrical connector and then uninstall the four nuts to remove the assembly. Thread sealant should be applied to the nuts before tightening them to 9 Nm (80 inch lbs.). Connect the electrical connector to its position before checking that both shift cable locking tabs lock securely and the cable end fits correctly onto the ball stud. Push the shift cable into the bracket until it makes a clicking noise and verify that it stays locked by pulling on the cable. Install the shift cable to the shift lever by putting the transmission in PARK position then adding the outer sleeve followed by the shift lever cable. After installing the floor console you should adjust the shift lever cable if necessary.

OEM Ford Focus Automatic Transmission Shift Levers

Automatic Transmission Shifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Automatic Transmission Shift Levers found

View related parts
Ford Focus Shifter Assembly Part Number: G1EZ-7210-LA
$213.49 MSRP: $313.50
You Save: $100.01 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Automatic Transmission Selector Handle; Shift Lever; Gear Shift Assembly
- Replaces: F1EZ-7210-LA, F1EZ-7210-LD, F1EZ-7210-LC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2018 Ford Focus | RS, S, SE, SEL, ST, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Shifter Assembly Part Number: F1EZ-7210-UD
$238.46 MSRP: $350.17
You Save: $111.71 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Automatic Transmission Selector Handle; Shift Lever; Gear Shift Assembly
- Replaces: F1EZ-7210-UA, F1EZ-7210-UC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2018 Ford Focus | RS, S, SE, SEL, ST, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Shifter Assembly Part Number: F1EZ-7210-PF
$227.23 MSRP: $333.67
You Save: $106.44 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Automatic Transmission Selector Handle; Shift Lever; Gear Shift Assembly
- Replaces: F1EZ-7210-PE, F1EZ-7210-PC, F1EZ-7210-PD, F1EZ-7210-PA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2018 Ford Focus | Electric | BATTERY EV (EV/BEV)
View related parts
Ford Focus Gear Shift Assembly Part Number: 7S4Z-7210-D
$211.86 MSRP: $330.00
You Save: $118.14 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing Assembly - Gear Shift; Automatic Transmission Selector Handle
- Replaces: 7S4Z-7210-B, 7S4Z-7210-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Focus | S, SE, SES, ST, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Shifter Assembly Part Number: BV6Z-7210-LC
$177.01 MSRP: $273.17
You Save: $96.16 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Automatic Transmission Selector Handle; Shift Lever; Gear Shift Assembly
- Replaces: BV6Z-7210-LA, BV6Z-7210-LB, C9PZ-7210-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2014 Ford Focus | S, SE, SEL, ST, Titanium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Ford Focus Shifter Assembly Part Number: BV6Z-7210-MC
$204.04 MSRP: $297.00
You Save: $92.96 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Automatic Transmission Selector Handle; Gear Shift Assembly; Shift Lever
- Replaces: BV6Z-7210-MB, C9PZ-7210-BB, BV6Z-7210-MA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2014 Ford Focus | S, SE, SEL, ST, Titanium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Ford Focus Shifter Assembly Part Number: AS4Z-7210-BA
$360.82 MSRP: $529.83
You Save: $169.01 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Selector Handle; Shift Lever; Gear Shift Assembly
- Replaces: 8S4Z-7210-BA, 8S4Z-7210-C, 9S4Z-7210-BB, 9S4Z-7210-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Gear Shift Assembly Part Number: 5S4Z-7210-A
Product Specifications
- Other Name: Lever - Gear Shift
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford Focus | LX, S, SE, SES, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Shifter Assembly Part Number: BV6Z-7210-DA
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Shift Lever; Automatic Transmission Selector Handle; Gear Shift Assembly; Shift Lever
- Manufacturer Note: Charcoal Black
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012-2014 Ford Focus | Electric | BATTERY EV (EV/BEV)
View related parts
Ford Focus Shifter Assembly Part Number: AS4Z-7210-AA
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Selector Handle; Shift Lever; Gear Shift Assembly
- Replaces: 9S4Z-7210-AA, 9S4Z-7210-AB, 8S4Z-7210-AA, 8S4Z-7210-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Ford Focus | S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Gear Shift Assembly Part Number: 7S4Z-7210-A
Product Specifications
- Other Name: Lever - Gear Shift
- Replaces: 5S4Z-7210-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford Focus | LX, S, SE, SES, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

Ford Focus Automatic Transmission Shift Levers

OEM Automatic Transmission Shift Levers boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Automatic Transmission Shift Levers with long life and a perfect fit. Come to our website and find genuine Ford Focus parts. We keep a wide inventory of OEM Focus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Focus Automatic Transmission Shift Levers Parts and Q&A

Gear Shift Assembly
5S4Z-7210-A
Q: How to Service and Repair Automatic Transmission Shift Levers on Ford Focus?
A:
Start service and repair of the Automatic Transmission Shifter by covering the vise jaw with vise jaw protectors. Rephrase the following sentence. The shifter service requires disconnecting the overdrive (O/D) switch electrical connector followed by removing the automatic transmission shift lever knob through its screw. To start the disassembly process of the automatic transmission shift lever, pull off the tappet before unclipping the bezel. The wiring harness needs to be located in front of the shift lever shaft with a centered position before installing the automatic transmission shift lever knob to protect the shift lever components and harness from damage. End with the disassembly sequence while applying grease to every sliding aspect as well as turning components.
Gear Shift Assembly
7S4Z-7210-D
Q: How to Remove and Replace Automatic Transmission Shift Levers on Ford Focus?
A:
A floor console removal is needed as the first step when handling automatic transmission shift levers replacement. First set the shift lever to PARK position before unclipping the shift lever cable and then removing its outer sleeve. First disconnect the shift lever assembly electrical connector and then uninstall the four nuts to remove the assembly. Thread sealant should be applied to the nuts before tightening them to 9 Nm (80 inch lbs.). Connect the electrical connector to its position before checking that both Shift Cable locking tabs lock securely and the cable end fits correctly onto the ball stud. Push the shift cable into the bracket until it makes a clicking noise and verify that it stays locked by pulling on the cable. Install the shift cable to the shift lever by putting the transmission in PARK position then adding the outer sleeve followed by the shift lever cable. After installing the floor console you should adjust the shift lever cable if necessary.