How to Service and Repair the Exhaust Valve and Intake Valve, Including Steps for Measuring Valve Clearance and Selecting Tappets on Ford Focus?

Service and repair of the valve starts by unbolting the valve cover and accessory drive belt splash shield as well as the two bolts before measuring each valve clearance at the base circle with the lobe away from the tappet. Properly tighten all bolts to 9 Nm (80 lb-in) after reinstallation. Wrench the engine clockwise using only the crankshaft bolt to measure each base circle clearance with the lobe facing the tappet before removing the camshafts because this step will lead to repeated installation which wastes labor time. Near the crankshaft bolt torques reach 9 Nm (80 lb-in) while measuring the feeler gauge data of each valve clearance point by point. A tappet with the mark 0.650 indicates a physical thickness of 3.650 millimeters because the decimal digits in the notation symbolize the total number size. The standard desired operating clearance for intake valves should be 0.25 mm (0.0095 in) while exhaust valves require 0.30 mm (0.0115 in) clearance. Measure tappet thickness by adding base tappet thickness with the measured clearance then subtracting the most desirable thickness measurement. The installation of new valves should result in clearances measuring between 0.22-0.28 mm (0.008-0.011 in) for intakes and 0.27-0.33 mm (0.010-0.013 in) for exhausts. Install the tappet which most closely matches the required size and identify its correct place for installation. The procedure requires replacement of new tappets at positions where existing tappets fail to match the inspection standards.

OEM Ford Focus Intake Valve

Engine Intake Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Intake Valves found

View related parts
Ford Focus Intake Valve Part Number: 9S4Z-6507-C
$14.36 MSRP: $20.90
You Save: $6.54 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Inlet
- Replaces: 1S7Z-6507-AA, 9S4Z-6507-A, 9S4Z-6507-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2018 Ford Focus | S, SE, SEL, SES, Titanium, ZX3, ZX4, ZX5, ZXW | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS
View related parts
Ford Focus Intake Valve Part Number: F7CZ-6507-CB
$3.33 MSRP: $4.60
You Save: $1.27 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Inlet
- Manufacturer Note: STD.
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Ford Focus | LX, SE | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Intake Valve Part Number: 1S7Z-6507-B
$17.19 MSRP: $24.38
You Save: $7.19 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Inlet
- Manufacturer Note: Intake
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2018 Ford Focus | RS, ST | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Focus Intake Valve Part Number: CM5Z-6507-A
$69.02 MSRP: $100.47
You Save: $31.45 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Inlet
- Manufacturer Note: Intake
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2018 Ford Focus | SE | 3 Cyl 1.0 L GAS
View related parts
Ford Focus Exhaust Valve Part Number: F8RZ-6507-BA
$13.78 MSRP: $18.75
You Save: $4.97 (27%)
ADD TO CART
Product Specifications
- Other Name: Valve - Inlet; Intake Valve; Valves
- Replaces: F5RZ-6507-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Ford Focus | SE, Sony Limited Edition, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Intake Valve Part Number: 2M5Z-6507-AA
Product Specifications
- Other Name: Valve - Inlet
- Manufacturer Note: Std., (SVT)
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2004 Ford Focus | SVT | 4 Cyl 2.0 L GAS
View related parts
Ford Focus Intake Valve Part Number: 3S4Z-6507-AA
Product Specifications
- Other Name: Valve - Inlet
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Focus | ST, ZX4 ST | 4 Cyl 2.3 L GAS

Ford Focus Intake Valve

OEM Intake Valve boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Intake Valve with long life and a perfect fit. Come to our website and find genuine Ford Focus parts. We keep a wide inventory of OEM Focus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Intake Valve in Ford Focus cars is of great importance in increasing performance and efficiency of combustion through the mixture of air and fuel. These valves have to open and close at appropriate intervals to permit sufficient combustion and adequate levels of engine power, otherwise, the result will be inadequate combustion and significantly reduced engine performance. Depending on the year of manufacture of Ford Focus cars, there have been different types of Intake Valves used due to the each models requirements for certain performances. There would also be high expenses on repairs or even total loss of the Intake Valve which should be rectified by a replacement when damaged. The replacement process includes some tools and adapted measures in order to install the Intake Valve correctly and without any problem that could diminish the power or efficiency of the car.

Ford Focus Intake Valve Parts and Q&A

Intake Valve
9S4Z-6507-C
Q: How to Service and Repair the Exhaust Valve and Intake Valve, Including Steps for Measuring Valve Clearance and Selecting Tappets on Ford Focus?
A:
Service and repair of the valve starts by unbolting the valve cover and accessory drive belt splash shield as well as the two bolts before measuring each valve clearance at the base circle with the lobe away from the tappet. Properly tighten all bolts to 9 Nm (80 lb-in) after reinstallation. Wrench the engine clockwise using only the crankshaft bolt to measure each base circle clearance with the lobe facing the tappet before removing the camshafts because this step will lead to repeated installation which wastes labor time. Near the crankshaft bolt torques reach 9 Nm (80 lb-in) while measuring the feeler gauge data of each valve clearance point by point. A tappet with the mark 0.650 indicates a physical thickness of 3.650 millimeters because the decimal digits in the notation symbolize the total number size. The standard desired operating clearance for intake valves should be 0.25 mm (0.0095 in) while exhaust valves require 0.30 mm (0.0115 in) clearance. Measure tappet thickness by adding base tappet thickness with the measured clearance then subtracting the most desirable thickness measurement. The installation of new valves should result in clearances measuring between 0.22-0.28 mm (0.008-0.011 in) for intakes and 0.27-0.33 mm (0.010-0.013 in) for exhausts. Install the tappet which most closely matches the required size and identify its correct place for installation. The procedure requires replacement of new tappets at positions where existing tappets fail to match the inspection standards.