How to service and repair the accelerator cable on Ford Mustang?

The accelerator cable can be serviced by pushing out the nylon bushing contained in the pedal, removing the fixing bolts and disconnecting the cable to the throttle body. Break it off of the retaining bracket by smashing the tabs. To install, undo installation directions.

How to service and repair the accelerator cable for the Cobra on Ford Mustang?

In order to service the accelerator cable of the Cobra, one must, first, push out the nylon bushing, disconnect the cable with throttle cam, and push the tabs to remove the cable out of the bracket. Slide the clip up, put the cable aside and take out the bolts. To install the reverse the steps taken out.

OEM Ford Mustang Accelerator Cable

Choke Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Accelerator Cables found

View related parts
Ford Mustang Throttle Cable Part Number: F8ZZ-9A758-CA
Product Specifications
- Other Name: Cable Assembly - Throttle Control
- Manufacturer Note: 2V, M/T
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2004 Ford Mustang | GT, GT Bullitt | 8 Cyl 4.6 L GAS
View related parts
Ford Mustang Throttle Cable Part Number: 1R3Z-9A758-AA
Product Specifications
- Other Name: Cable Assembly - Throttle Control
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2004 Ford Mustang | Base | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS
View related parts
Ford Mustang Throttle Cable Part Number: 2R3Z-9A758-AA
$27.38 MSRP: $49.57
You Save: $22.19 (45%)
Product Specifications
- Other Name: Cable Assembly - Throttle Control
- Manufacturer Note: 32" (813 MM)
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Mustang | Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 8 Cyl 4.6 L GAS
View related parts
Ford Mustang Throttle Cable Part Number: F6ZZ-9A758-DA
Product Specifications
- Other Name: Cable Assembly - Throttle; Cable Assembly - Throttle Control
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1998 Ford Mustang | Base | 6 Cyl 3.8 L GAS
View related parts
Ford Mustang Throttle Cable Part Number: F8ZZ-9A758-AA
Product Specifications
- Other Name: Cable Assembly - Throttle; Cable Assembly - Throttle Control
- Manufacturer Note: 2V,A/T
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2004 Ford Mustang | GT, GT Bullitt | 8 Cyl 4.6 L GAS
View related parts
Ford Mustang Throttle Cable Part Number: 1R3Z-9A758-CA
Product Specifications
- Other Name: Cable Assembly - Throttle; Cable Assembly - Throttle Control
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001, 1999 Ford Mustang | SVT Cobra | 8 Cyl 4.6 L GAS

Ford Mustang Accelerator Cable

Welcome to our website where you can discover high-quality, genuine Ford Mustang Accelerator Cable. We offer an extensive inventory of OEM Ford Mustang Accelerator Cable at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Mustang Accelerator Cable Parts and Q&A

Throttle Cable
2R3Z-9A758-AA
Q: How to service and repair the accelerator cable on Ford Mustang?
A: The accelerator cable can be serviced by pushing out the nylon bushing contained in the pedal, removing the fixing bolts and disconnecting the cable to the Throttle Body. Break it off of the retaining bracket by smashing the tabs. To install, undo installation directions.
Throttle Cable
F8ZZ-9A758-AA
Q: How to service and repair the accelerator cable for the Cobra on Ford Mustang?
A: In order to service the accelerator cable of the Cobra, one must, first, push out the nylon bushing, disconnect the cable with throttle cam, and push the tabs to remove the cable out of the bracket. Slide the clip up, put the cable aside and take out the bolts. To install the reverse the steps taken out.