How to service and repair the one-piece antenna cable on Ford Ranger?

An antenna cable repair starts with removing the radio chassis while the antenna lead-in cable remains in position. Open the glove box door and release its tabs before lowering it to its full extent. Pull the rubber grommet from the sheet metal after disconnecting the antenna lead-in cable wire clip to lead the antenna through the opening. The radio antenna mast requires counterclockwise rotation followed by unsnap removal of the radio antenna base cap and subsequent removal of the antenna base along with lead-in cable by unscrewing. Lift out the antenna base to disconnect the lead-in cable while pushing the rubber grommet through the sheet metal for accessing the hole where the antenna cable will pass through. Reinstall the equipment using the opposite procedure of removal.

OEM Ford Ranger Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Antenna Cables found

View related parts
Ford Ranger Antenna Cable
Part Number: 8L5Z-18812-A
$22.16 MSRP: $31.43
You Save: $9.27 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension; Cable
- Manufacturer Note: Orange
- Replaces: 6L5Z-18812-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Ford Ranger | FX4, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Antenna Cable, Center
Part Number: KB3Z-18812-PA
$29.52 MSRP: $40.84
You Save: $11.32 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension; Antenna Cable, Center
- Position: Center
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Antenna Cable, Center
Part Number: KB3Z-18812-HA
$25.98 MSRP: $35.94
You Save: $9.96 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension; Antenna Cable, Center
- Position: Center
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Antenna Cable, Rear
Part Number: KB3Z-18812-C
$24.21 MSRP: $33.49
You Save: $9.28 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension; Antenna Cable, Rear; Rear Extension
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Antenna Cable, Center
Part Number: KB3Z-18812-TF
$65.58 MSRP: $100.92
You Save: $35.34 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension; Antenna Cable, Center
- Position: Center
- Replaces: KB3Z-18812-TB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Cable
Part Number: KB3Z-18812-K
$34.18 MSRP: $48.48
You Save: $14.30 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension; Antenna Cable
- Replaces: KB3Z-18812-BAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Antenna Cable, Center
Part Number: KB3Z-18812-H
$69.17 MSRP: $100.68
You Save: $31.51 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension; Antenna Cable, Center
- Position: Center
- Replaces: KB3Z-18812-MB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Cable
Part Number: KB3Z-18812-G
$37.38 MSRP: $53.48
You Save: $16.10 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension
- Replaces: KB3Z-18812-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Front Extension
Part Number: EB3Z-18812-K
$55.64 MSRP: $80.98
You Save: $25.34 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension; Antenna Cable, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | XL | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Antenna Cable, Rear
Part Number: KB3Z-18812-D
$52.62 MSRP: $80.83
You Save: $28.21 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension; Antenna Cable, Rear; Rear Extension
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Front Extension
Part Number: KB3Z-18812-B
$31.36 MSRP: $40.00
You Save: $8.64 (22%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Extension; Antenna Cable, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Antenna Cable
Part Number: F5TZ-18812-A
Product Specifications
- Other Name: Cable Assembly - Extension
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1999 Ford Ranger | Splash, Sport, STX, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Antenna Cable
Part Number: 3L5Z-18812-BA
Product Specifications
- Other Name: Cable Assembly - Extension; Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2003 Ford Ranger | Edge, Splash, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Antenna Cable
Part Number: 4L5Z-18812-AB
Product Specifications
- Other Name: Cable Assembly - Extension; Cable
- Replaces: 4L5Z-18812-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Ranger | Edge, FX4, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Front Extension
Part Number: KB3Z-18812-A
Product Specifications
- Other Name: Cable Assembly - Extension; Antenna Cable, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS

Ford Ranger Antenna Cable

Welcome to our website where you can discover high-quality, genuine Ford Ranger Antenna Cable. We offer an extensive inventory of OEM Ford Ranger Antenna Cable at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Ranger Antenna Cable Parts Questions & Experts Answers

Antenna Cable
3L5Z-18812-BA
Q: How to service and repair the one-piece antenna cable on Ford Ranger?
A: An antenna cable repair starts with removing the radio chassis while the antenna lead-in cable remains in position. Open the Glove Box door and release its tabs before lowering it to its full extent. Pull the rubber grommet from the sheet metal after disconnecting the antenna lead-in cable wire clip to lead the antenna through the opening. The radio antenna mast requires counterclockwise rotation followed by unsnap removal of the radio antenna base cap and subsequent removal of the antenna base along with lead-in cable by unscrewing. Lift out the antenna base to disconnect the lead-in cable while pushing the rubber grommet through the sheet metal for accessing the hole where the antenna cable will pass through. Reinstall the equipment using the opposite procedure of removal.