What defects should be inspected in the connecting rod bearings that may indicate specific issues on Ford Taurus?

Check the connecting rod bearings for different types of damage to understand why they failed: deep pits show tool fatigue, shiny spots show poor alignment, foreign material shows dirty oil, noticeable marks show dirty oil, and bare metal shows poor lubrication while uneven edges suggest damaged joints and single wear indicates joint taper or improper installation.

How to service the connecting rod bearings on Ford Taurus?

A proper connecting rod bearing service begins by removing the oil pan and possibly the oil pump. Any error in matching the connecting rod bearing caps and rods will result in engine damage because they function as a system. Disassemble the two nuts from the bearing cap of the connecting rod before extracting the connecting rod bearings. The connecting rod bearings require lubrication with new clean oil right before placement since they have a precise fit. Replace the connecting rod bearings before putting back the connecting rod bearing cap and fastening it with two nuts to a torque of 35 Nm (26 ft. lbs.). Apply this procedure to every connecting rod bearing. Installation of the oil pump follows the reinstallation before finishing with the oil pan.

OEM Ford Taurus Rod Bearing

Engine Connecting Rod Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Rod Bearings found

View related parts
Ford Taurus Connecting Rod Bearing Part Number: BL3Z-6211-FA
$8.53 MSRP: $12.10
You Save: $3.57 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Connecting Rod; Rod Bearing; Bearing; Bearings
- Replaces: 7U3Z-6211-B, BL3Z-6211-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2017 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Connecting Rod Bearing Part Number: BL3Z-6211-DA
$8.47 MSRP: $12.01
You Save: $3.54 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Connecting Rod; Engine Connecting Rod Bearing Set; Con Rod Bearing Set; Rod Bearing; Bearing; Bearings
- Replaces: 7U3Z-6211-C, BL3Z-6211-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2017 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Connecting Rod Bearing Part Number: BL3Z-6211-EA
$8.73 MSRP: $12.38
You Save: $3.65 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Connecting Rod; Engine Connecting Rod Bearing Set; Con Rod Bearing Set; Rod Bearing; Bearing; Bearings
- Replaces: BL3Z-6211-B, HL3Z-6211-B, 7U3Z-6211-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2019 Ford Taurus | Limited, SE, SEL, SHO | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Bearing Set, Red Part Number: AG9Z-6211-C
$10.86 MSRP: $15.40
You Save: $4.54 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Connecting Rod; Rod Bearing; Bearing; Bearings
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2017 Ford Taurus | Limited, SE, SEL | 4 Cyl 2.0 L GAS
View related parts
Ford Taurus Bearing Set, Blue Part Number: AG9Z-6211-B
$10.86 MSRP: $15.40
You Save: $4.54 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Connecting Rod; Rod Bearing; Bearing; Bearings
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2017 Ford Taurus | Limited, SE, SEL | 4 Cyl 2.0 L GAS
View related parts
Ford Taurus Bearing Set, Green Part Number: AG9Z-6211-A
$10.86 MSRP: $15.40
You Save: $4.54 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Connecting Rod; Rod Bearing; Bearing; Bearings
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2017 Ford Taurus | Limited, SE, SEL | 4 Cyl 2.0 L GAS
View related parts
Ford Taurus Connecting Rod Part Number: F4SZ-6211-A
$13.78 MSRP: $18.75
You Save: $4.97 (27%)
ADD TO CART
Product Specifications
- Other Name: Bearing - Connecting Rod; Rod Bearing; Rod Bearings; Bearing; Bearings
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1988-1995 Ford Taurus | GL, L, LX, SE | 6 Cyl 3.8 L GAS
View related parts
Ford Taurus Bearing Part Number: F8DZ-6211-AA
$13.57 MSRP: $19.25
You Save: $5.68 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Connecting Rod; Engine Connecting Rod Bearing Set; Con Rod Bearing Set; Rod Bearing
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2007 Ford Taurus | LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Bearing Set, Brown Part Number: AG9Z-6211-D
$10.99 MSRP: $15.59
You Save: $4.60 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Connecting Rod; Rod Bearing; Bearing; Bearings
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2017 Ford Taurus | Limited, SE, SEL | 4 Cyl 2.0 L GAS
View related parts
Ford Taurus Bearing Part Number: 9L8Z-6211-A
$6.66 MSRP: $9.44
You Save: $2.78 (30%)
Product Specifications
- Other Name: Bearing - Connecting Rod; Rod Bearing; Bearings
- Manufacturer Note: 2 Per Package
- Replaces: F6DZ-6211-AF, F5RZ-6211-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2005 Ford Taurus | LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Connecting Rod Part Number: FODZ-6200-A
Product Specifications
- Other Name: Bearing - Connecting Rod
- Manufacturer Note: Rod & brgs have oil hole they are replaced by rod & brgs without oil holes-oil holes are not reqd.
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1988-1991 Ford Taurus | GL, L, LX | 6 Cyl 3.8 L GAS
View related parts
Ford Taurus Bearing Part Number: F5DZ-6211-F
Product Specifications
- Other Name: Bearing - Connecting Rod; Engine Connecting Rod Bearing; Con Rod Bearing Pair; Rod Bearing
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1998 Ford Taurus | G, GL, SE, SE Comfort | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Bearing Part Number: E9DZ6211A
Product Specifications
- Other Name: Bearing Connecting Rod Set; Rod Bearing; Bearing - Connecting Rod
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1989-1995 Ford Taurus | SHO | 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS
View related parts
Ford Taurus Bearing Part Number: E6DZ-6211-A
Product Specifications
- Other Name: Bearing - Connecting Rod; Rod Bearing; Bearings
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1994 Ford Taurus | GL, L, LX, SHO | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Bearing Part Number: E63Z-6211-A
Product Specifications
- Other Name: Bearing - Connecting Rod; Rod Bearing
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1991 Ford Taurus | GL, L, LX, MT5 | 4 Cyl 2.5 L GAS

Ford Taurus Rod Bearing

OEM Rod Bearing boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Rod Bearing with long life and a perfect fit. Come to our website and find genuine Ford Taurus parts. We keep a wide inventory of OEM Taurus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Taurus Rod Bearing can be described as a highly functional unit, well-known among drivers for its effectiveness and operational characteristics, which contributes greatly to the functionality of the Ford Taurus automobile's engine. Meant for supporting the crankshaft and the connecting rods, the Rod Bearing offers the right oil clearance that seems to be of paramount significance in ascertaining the efficiency to the overall safety of the automobile's engins. With either the bi-metal or the tri-metal, the Ford Taurus Rod Bearing has properties that are converted in strong materials liked by both the high-performance and the general Taurus models. The tri-metal version, which is commonly used and may have proprietary dry film lubrication, reduces friction and increases the durability of the Ford Taurus and enhances the vehicles performance. Thus the elaborate work done in developing and engineering of the Rod Bearing contributes to the enhancement of the efficiency of the vehicles and also to the guarantee of safety of the vehicles by observing the way they operate when driven under various circumstances. The model Ford Taurus has changes over the period of time and the compatibility issue with the different models also shows the significance of the Rod Bearing for the proper functioning of the car. Characteristic features and durable performance of the Ford Taurus Rod Bearing are justified in the context of the automotive industry, thus proving the brand's reliability by adhering to the Ford principle of quality and new achievements. Therefore, the Ford Taurus is still a favorite for drivers who are looking for a reliable and high performance car today, with the help of the contribution form the Rod Bearing.

Ford Taurus Rod Bearing Parts and Q&A

Bearing
9L8Z-6211-A
Q: What defects should be inspected in the connecting rod bearings that may indicate specific issues on Ford Taurus?
A:
Check the connecting rod bearings for different types of damage to understand why they failed: deep pits show tool fatigue, shiny spots show poor alignment, foreign material shows dirty oil, noticeable marks show dirty oil, and bare metal shows poor lubrication while uneven edges suggest damaged joints and single wear indicates joint taper or improper installation.
Bearing
F8DZ-6211-AA
Q: How to service the connecting rod bearings on Ford Taurus?
A:
A proper connecting rod bearing service begins by removing the Oil Pan and possibly the Oil Pump. Any error in matching the connecting rod bearing caps and rods will result in engine damage because they function as a system. Disassemble the two nuts from the bearing cap of the connecting rod before extracting the connecting rod bearings. The connecting rod bearings require lubrication with new clean oil right before placement since they have a precise fit. Replace the connecting rod bearings before putting back the connecting rod bearing cap and fastening it with two nuts to a torque of 35 Nm (26 ft. lbs.). Apply this procedure to every connecting rod bearing. Installation of the oil pump follows the reinstallation before finishing with the oil pan.