OEM Ford Taurus X Drive Belt

Ford Taurus X Drive Belt Parts Questions & Experts Answers

• Serpentine Belt
  BT4Z-8620-A
  Q: How to Service the Power Steering Drive Belt on Ford Taurus X?

  A: The service procedure for the power steering pump belt begins with totally abstaining from lubrication application on both the accessory drive belt and its tensioner or pulleys because this causes damage. At the top position of the vehicle users should turn the accessory drive belt tensioner clockwise to extract the accessory drive belt from the generator pulley. Start by removing the right front wheel accompanied by the tire before taking off the seven pin-type retainers along with the right-hand splash shield. Next position the accessory drive belt away from the crankshaft pulley before using the Stretchy Belt Remover on the power steering pump pulley to start winding the belt onto its pulley by 90 degrees. Rotate the crankshaft to the right while consistently applying Stretchy Belt Remover to the power steering pump pulley and then remove the power steering pump belt. The Stretchy Belt Remover should be placed under the power steering pump belt before being swiftly extracted from the right-hand fender well to get rid of the coolant pump belt. During the installation process position the power steering drive belt onto the crankshaft pulley where it must rest correctly between the crankshaft as well as the power steering pump pulleys. The Power Steering Belt Installation Tool helps guide the power steering belt onto the pump pulley and clockwise crankshaft rotation installs the belt. After placing the accessory drive belt on the crankshaft pulley position it properly on each pulley. The accessory drive belt tensioner requires clockwise rotation before installing the accessory drive belt. Return the right-hand splash shield into place by securing it with seven pin-type retainers while putting on the right front tire and wheel.