How to service the Wiper Pivot and mounting arm on Ford Taurus X?

The wiper mounting arm servicing process starts with disassembly of the wiper pivot arms and cowl panel grille after which service the wiper mounting arm and pivot shaft. The next step requires disconnecting the electrical connector followed by bolt removal from three wiper mounting arm and pivot shaft assembly points. Use 8 Nm torque (71 lb-in) settings when tightening wiper bolts during reinstallation because this will aid in a proper reassembly. Finish up the process by modifying the wiper pivot arms when needed.

OEM Ford Taurus X Wiper Pivot

Windshield Wiper Pivot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Pivot found

View related parts
Ford Taurus X Wiper Linkage Part Number: 8F9Z-17566-A
Product Specifications
- Other Name: Arm And Pivot Shaft; Windshield Wiper Linkage; Front Transmission; Arm And Pivot Shaft Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus X | Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS

Ford Taurus X Wiper Pivot

OEM Wiper Pivot boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Wiper Pivot with long life and a perfect fit. Come to our website and find genuine Ford Taurus X parts. We keep a wide inventory of OEM Taurus X parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Taurus X Wiper Pivot Parts and Q&A

Wiper Linkage
8F9Z-17566-A
Q: How to service the Wiper Pivot and mounting arm on Ford Taurus X?
A:
The wiper mounting arm servicing process starts with disassembly of the wiper pivot arms and cowl panel grille after which service the wiper mounting arm and pivot shaft. The next step requires disconnecting the electrical connector followed by bolt removal from three wiper mounting arm and pivot shaft assembly points. Use 8 Nm torque (71 lb-in) settings when tightening wiper bolts during reinstallation because this will aid in a proper reassembly. Finish up the process by modifying the wiper pivot arms when needed.