Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose
Manufacturer Note: Tube asy , a/c auxiliary evaporator inlet , w/ high output (auxiliary) a/c,attaches from underbody a/c supply line to small auxiliary evaporator jumper line
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
1999-2003 Ford Windstar | 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose
Manufacturer Note: A/C aux evaporator tube asy - smaller tube that attaches from underbody tube to auxiliary evaporator core, with high output (auxiliary) heater/AC
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
1999-2003 Ford Windstar | 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
Other Name: Tube Compressor To Manifold; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly; Tube - Compressor To Manifold
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
1995-1998 Ford Windstar | 3.0L, Base, GL, Limited, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
| Page 1 of 2 |Next >
1-20 of 22 Results
Ford Windstar A/C Hose
Welcome to our website where you can discover high-quality, genuine Ford Windstar A/C Hose. We offer an extensive inventory of OEM Ford Windstar A/C Hose at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Q: How to Service and Repair the A/C Hose on Ford Windstar?
A: In order to service the HVAC hose/line, disconnect the battery and do the Refrigerant Discharging and Recovery Procedure. Take out the suction accumulator/drier, and disconnect the required lines. To install, simply reverse these removal instructions and apply PAG Compressor Oil compatible O-ring seal.
Q: How to service and repair the A/C Hose for auxiliary climate control on Ford Windstar?
A: In order to fix the HVAC hose of auxiliary climate control, first unplug the battery and carry out refrigerant recovery. Take off the suction accumulator, elevate the vehicle and disconnect the auxiliary A/C line and fittings. Installation- Undo the process and apply compatible PAG Compressor Oil to the O-ring.