OEM Lincoln Blackwood Bumper

Lincoln Blackwood Bumper Parts and Q&A

• Impact Bar, Rear
  2C6Z-17906-AA
  Q: How to service and repair the rear bumper while ensuring safety with the air suspension system on Lincoln Blackwood?

  A:

  Operation on the rear bumper requires users to disable the air suspension system power by turning off the air suspension switch which sits below the glove box in the lower right of the passenger foot well because not doing so could result in unexpected air spring inflation or deflation leading to vehicle shift when in operation. Start bytaking components off in the sequence shown in both the provided illustration and table. Repetition of the reverse process should be used after completing removal to install the rear bumper. The procedure starts only after air suspension disability and vehicle lift followed by air suspension re-enablement during and after installation so you can move the vehicle.
• Impact Bar
  F85Z-17757-AA
  Q: How to remove the front bumper while ensuring safety with the air suspension system on Lincoln Blackwood?

  A:

  The initial step to uninstall the front bumper is turning off the air suspension system power through the air suspension switch positioned below the glove box in the lower right section of the passenger foot well because leaving it on may trigger sudden air spring operation that could shift the vehicle. Remove the components following the given sequence. To install reverse the steps used during removal. Disabling the air suspension system is essential before taking out bolts followed by reenabling this feature before driving the vehicle. To detach the front bumper cover from the grill opening reinforcement panel pull on the bottom with downward force on the top side. The procedure for bumper removal starts with disconnecting both fog lamp electrical connectors.