How to service and repair the coolant reservoir on Lincoln Blackwood?

The initial step when working on the coolant reservoir starts with partial draining of the cooling system. Start by unscrewing the hose clamp then pulling the hose away from its connection to end in removing the radiator hose. Next step is to slide the hose off from the radiator fitting. The lower radiator hose should be taken off from the degas bottle before proceeding to remove the degas bottle itself. The degas bottle installation follows the reverse steps of removal.

OEM Lincoln Blackwood Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Coolant Reservoirs found

View related parts
Lincoln Blackwood Expansion Tank
Part Number: 3L3Z-8A080-AB
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Reservoir; Coolant Reservoir
- Manufacturer Note: #3L34 8A080-AA
- Replaces: 2L3Z-8A080-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002 Lincoln Blackwood | Base | 8 Cyl 5.4 L GAS
View related parts
Lincoln Blackwood Expansion Tank
Part Number: 3L3Z-8A080-AA
Product Specifications
- Other Name: Tank Assembly - Radiator; Tank Assembly - Radiator Overflow
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002 Lincoln Blackwood | Base | 8 Cyl 5.4 L GAS

Lincoln Blackwood Coolant Reservoir

Welcome to our website where you can discover high-quality, genuine Lincoln Blackwood Coolant Reservoir. We offer an extensive inventory of OEM Lincoln Blackwood Coolant Reservoir at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Lincoln Blackwood Coolant Reservoir Parts Questions & Experts Answers

Expansion Tank
3L3Z-8A080-AA
Q: How to service and repair the coolant reservoir on Lincoln Blackwood?
A: The initial step when working on the coolant reservoir starts with partial draining of the cooling system. Start by unscrewing the hose clamp then pulling the hose away from its connection to end in removing the Radiator hose. Next step is to slide the hose off from the radiator fitting. The lower radiator hose should be taken off from the degas bottle before proceeding to remove the degas bottle itself. The degas bottle installation follows the reverse steps of removal.