Other Name: Belt And Buckle Assembly; Center Seat Belt
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2002 Lincoln LS | Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
| Page 1 of 4 |Next >
1-20 of 76 Results
Lincoln LS Seat Belt
Welcome to our website where you can discover high-quality, genuine Lincoln LS Seat Belt. We offer an extensive inventory of OEM Lincoln LS Seat Belt at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Lincoln LS Seat Belt Parts Questions & Experts Answers
Q: What safety precautions should be taken when servicing an undeployed, scrapped seat belt system on Lincoln LS?
A: Your priority during seat belt service on undeployed and scrapped vehicles should be to wear safety glasses before handling due to the risk of unexpected air bag activation. Keep your fingers and your clothing safely away from the moving parts of the live safety belt retractor/pretensioner assembly when handling it. The deployment of safety belt retractor/pretensioner systems should take place remotely outside while maintaining a minimum 20-foot distance between personnel and using hearing protection because of the deployment's loud noise. Start by removing the safety belt retractor and retainer assembly from the vehicle before cutting the electrical connector. Stripping 25mm of insulation from wires completes the first step. Attache each end of two 20-gauge wires which are 6.1 meters long to the pretenisoner wires of the safety belts. Place the assembly flat on an open surface with minimum 6.1 meter distance between the components and avoid contact of moveable parts with the support surface. Activate the pretensioner by connecting its wire terminals to a 12-volt battery battery terminals. A minimum of ten minutes must pass after deployment before approaching the assembly while the standard scrapping procedures apply to disposed deployed safety belt retractor/pretensioner assemblies.