My Garage
Cart

OEM Lincoln Mark LT Front Cross-Member

Front Engine Cross Member
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Front Cross-Members found

  • Lincoln Mark LT Front Cross-Member - 8L3Z-5019-B
    Lincoln Mark LT Front Cross-Member Diagram - 8L3Z-5019-B
    View related parts
    Product Specifications
    • Other Name: Cross Member Assembly; Frame Rail, Front
    • Position: Front
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2006-2008 Lincoln Mark LT | Base | 8 Cyl 5.4 L GAS
  • Lincoln Mark LT Front Cross-Member - 8L3Z-5019-A
    Lincoln Mark LT Front Cross-Member Diagram - 8L3Z-5019-A
    View related parts
    Product Specifications
    • Other Name: Kit - Frame Rail Repair Front; Frame Rail, Front; Kit-Frame Rail Repair Front
    • Position: Front
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2006-2008 Lincoln Mark LT | Base | 8 Cyl 5.4 L GAS

Lincoln Mark LT Front Cross-Member

OEM Front Cross-Member boasts unmatched quality. Each part goes through full quality checks. They adhere to Lincoln's official factory standards. These steps remove flaws and inconsistencies. So you can get Front Cross-Member with long life and a perfect fit. Come to our website and find genuine Lincoln Mark LT parts. We keep a wide inventory of OEM Mark LT parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Lincoln Mark LT Front Cross-Member Parts and Q&A

  • Q: How to service the Front Cross-Member and Rear Crossmember of the transmission support on Lincoln Mark LT?
    A:
    Service operations for the transmission support crossmember should be started after placing the vehicle in neutral position and raising it on a hoist. Remove the exhaust hanger bolts first while tightening them to 40 Nm during reinstallation. The installation of the two heat shield screws should be done at 20 Nm (15 lb-ft) torque when you reinstall them. A proper jack should be used to support the transmission before you remove the two supporting transmission nuts that need a torque of 103 Nm (76 lb-ft) for installation. After removal of the four transmission support crossmember bolts continue with installation by tightening them to 115 Nm (85 lb-ft). After removing the transmission support crossmember you should replace it using the reverse order.

Related Lincoln Mark LT Parts