How to remove and replace the LH exhaust manifold on Lincoln MKS?

A proper replacement or removal of the LH exhaust manifold starts with unfastening the LH catalytic converter along with its LH Heated Oxygen Sensor (HO2S). You must remove the 3 bolts that secure the LH exhaust manifold heat shield before taking out the 6 nuts which hold the LH exhaust manifold. Keep the nuts and gasket for disposal. The cleaning process needs to start with the LH exhaust manifold followed by an inspection then ending with discarding the 6 LH exhaust manifold studs. The use of metal scrapers and wire brushes or abrasive tools for sealing surface cleaning on the exhaust manifold should be avoided because such tools may produce leaks from scratches and gouges. Follow packaging instructions to clean the exhaust manifold mating surface on the cylinder head by using a plastic scraper with metal surface prep. The installation process requires the use of 6 new LH exhaust manifold studs which should be tightened to 12 Nm (106 lb-in). Installation of the LH exhaust manifold requires a new gasket which should be installed with six new nuts tightened in two stages to 20 Nm (177 lb-in) followed by 25 Nm (18 lb-ft). Reinstall the LH exhaust manifold heat shield by tightening its 3 bolts to 10 Nm (89 lb-in) and then install the LH HO2S followed by installing the LH catalytic converter.

How to remove and replace the right-hand exhaust manifold on Lincoln MKS?

The removal process for the right-hand (RH) exhaust manifold demands initial steps of catalytic converter extraction and disconnected Heated Oxygen Sensor (HO2S) electrical connection. The next step requires you to detach six nuts holding the RH exhaust manifold in place while discarding the nuts as well as the gasket. Begin by cleaning the RH exhaust manifold followed by a stud removal process of its six components which leads to disposal. The sealing surfaces require cleaning with a plastic scraper from which metal scrapers and wire brushes and abrasive tools must be avoided due to their potential to create leaking defects. Follow the packaging instructions to perform metal surface prep on the exhaust manifold mating surface of the cylinder head. Follow this installation procedure by using six new RH exhaust manifold studs that need to be tightened to 12 Nm (106 lb-in). The process of exhaust leak prevention requires two-stage torque tightening of new exhaust manifold nuts beginning with a torque of 20 Nm (177 lb-in) followed by a torque of 25 Nm (18 lb-ft). Install the RH exhaust manifold first using a new gasket before the torque sequence starts. The RH HO2S electrical connector needs to be restored while the RH catalytic converter must be installed.

OEM Lincoln MKS Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Exhaust Manifolds found

View related parts
Lincoln MKS Catalytic Converter, Front Driver Side Part Number: DA8Z-5G232-C
$954.31 MSRP: $1022.86
You Save: $68.55 (7%)
ADD TO CART
Product Specifications
- Other Name: Exhaust Manifold And Catalyst; Catalytic Converter with Integrated Exhaust Manifold, Left; Manifold Converter; Exhaust Manifold; Manifold W/Converter; Catalyst Assembly; Integrated Catalytic Converter.
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2015 Lincoln MKS | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Exhaust Manifold, Passenger Side Part Number: FB5Z-5G232-B
$1098.30 MSRP: $1487.14
You Save: $388.84 (27%)
ADD TO CART
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter with Integrated Exhaust Manifold, Right; Manifold Converter; Manifold W/Converter; Catalytic Converter with Integrated Exhaust Manifold; Catalytic Converter
- Manufacturer Note: Rear
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2016 Lincoln MKS | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Exhaust Manifold, Front Driver Side Part Number: FB5Z-5G232-A
$732.90 MSRP: $990.00
You Save: $257.10 (26%)
ADD TO CART
Product Specifications
- Other Name: Exhaust Manifold And Catalyst; Catalytic Converter with Integrated Exhaust Manifold, Left; Manifold Converter; Manifold W/Converter; Exhaust Manifold and Catalyst Assembly; Integrated Catalytic Converter.
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2016 Lincoln MKS | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Catalytic Converter, Passenger Side Part Number: DA8Z-5G232-D
$1380.00 MSRP: $1745.71
You Save: $365.71 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter with Integrated Exhaust Manifold, Right; Manifold Converter; Exhaust Manifold; Manifold W/Converter; Catalytic Converter with Integrated Exhaust Manifold
- Manufacturer Note: Rear
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2015 Lincoln MKS | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Exhaust Manifold, Driver Side Part Number: DA5Z-9431-A
$129.99 MSRP: $200.60
You Save: $70.61 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Lincoln MKS | EcoBoost | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKS Exhaust Manifold, Passenger Side Part Number: DA5Z-9430-A
$131.68 MSRP: $191.67
You Save: $59.99 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right
- Position: Passenger Side
- Replaces: AA5Z-9430-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2016 Lincoln MKS | EcoBoost | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKS Exhaust Manifold, Passenger Side Part Number: 7T4Z-9430-C
$64.01 MSRP: $93.17
You Save: $29.16 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2010 Lincoln MKS | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Exhaust Manifold, Driver Side Part Number: 7T4Z-9431-C
$62.42 MSRP: $86.35
You Save: $23.93 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Position: Driver Side
- Replaces: 7T4Z-9431-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2010 Lincoln MKS | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Exhaust Manifold, Driver Side Part Number: AA5Z-9431-A
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Lincoln MKS | EcoBoost | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKS Exhaust Manifold, Driver Side Part Number: BG1Z-5G232-C
$477.84 MSRP: $601.43
You Save: $123.59 (21%)
Product Specifications
- Other Name: Exhaust Manifold And Catalyst; Catalytic Converter with Integrated Exhaust Manifold, Left; Manifold W/Converter; Exhaust Manifold And Catalyst Assembly; Catalytic Converter
- Position: Driver Side
- Replaces: BG1Z-5G232-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Lincoln MKS | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKS Exhaust Manifold, Passenger Side Part Number: AT4Z-9430-B
$60.34 MSRP: $87.83
You Save: $27.49 (32%)
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Replaces: AT4Z-9430-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Lincoln MKS | Base | 6 Cyl 3.7 L GAS

Lincoln MKS Exhaust Manifold

OEM Exhaust Manifold boasts unmatched quality. Each part goes through full quality checks. They adhere to Lincoln's official factory standards. These steps remove flaws and inconsistencies. So you can get Exhaust Manifold with long life and a perfect fit. Come to our website and find genuine Lincoln MKS parts. We keep a wide inventory of OEM MKS parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Lincoln MKS Exhaust Manifold is the crucial part of any Lincoln MKS vehicle's exhaust system, acclaimed for its durability as well as horsepower. Specifically It is carefully engineered part that helps the hot exhausted gases coming out of the engine to be meticulously drained to the tailpipe to enhance the performance of the Lincoln MKS without exposing passengers to the dangers of the toxic fumes. Designed to fit different types of Lincoln MKS models manufactured between 2008 and 2016, this exhaust manifold is made from materials such as cast iron or stainless steel that allow it to serve a longer time without getting corroded or damaged. As for the Lincoln MKS Exhaust Manifold there is flow resistance reduction and thus the velocity of gases increases and total efficiency of the engine also gets increased. This feature is unique crucial since it helps avoid the style of intake reversion which may negatively influence the function of the engine. Also, the Lincoln MKS Exhaust Manifold is well designed to endure the common use which makes it a great competitor in the market. Because of this, it is important in the Lincoln MKS lineup as it increases efficiency while at the same time making the cars safer. Featuring features such as a durable materials used in construction, the ability to fit several model of the MKS and an aesthetically pleasing design, this Lincoln MKS Exhaust Manifold is indicative of the brand's uncompromised quality and performance, thereby guaranteeing that the Lincoln brand delivers only the optimal it has to offer to its buyers.

Lincoln MKS Exhaust Manifold Parts and Q&A

Exhaust Manifold, Driver Side
7T4Z-9431-C
Q: How to remove and replace the LH exhaust manifold on Lincoln MKS?
A:
A proper replacement or removal of the LH exhaust manifold starts with unfastening the LH catalytic converter along with its LH Heated Oxygen Sensor (HO2S). You must remove the 3 bolts that secure the LH exhaust manifold heat shield before taking out the 6 nuts which hold the LH exhaust manifold. Keep the nuts and gasket for disposal. The cleaning process needs to start with the LH exhaust manifold followed by an inspection then ending with discarding the 6 LH exhaust manifold studs. The use of metal scrapers and wire brushes or abrasive tools for sealing surface cleaning on the exhaust manifold should be avoided because such tools may produce leaks from scratches and gouges. Follow packaging instructions to clean the exhaust manifold mating surface on the cylinder head by using a plastic scraper with metal surface prep. The installation process requires the use of 6 new LH exhaust manifold studs which should be tightened to 12 Nm (106 lb-in). Installation of the LH exhaust manifold requires a new gasket which should be installed with six new nuts tightened in two stages to 20 Nm (177 lb-in) followed by 25 Nm (18 lb-ft). Reinstall the LH exhaust manifold heat shield by tightening its 3 bolts to 10 Nm (89 lb-in) and then install the LH HO2S followed by installing the LH catalytic converter.
Exhaust Manifold, Passenger Side
7T4Z-9430-C
Q: How to remove and replace the right-hand exhaust manifold on Lincoln MKS?
A:
The removal process for the right-hand (RH) exhaust manifold demands initial steps of catalytic converter extraction and disconnected Heated Oxygen Sensor (HO2S) electrical connection. The next step requires you to detach six nuts holding the RH exhaust manifold in place while discarding the nuts as well as the gasket. Begin by cleaning the RH exhaust manifold followed by a stud removal process of its six components which leads to disposal. The sealing surfaces require cleaning with a plastic scraper from which metal scrapers and wire brushes and abrasive tools must be avoided due to their potential to create leaking defects. Follow the packaging instructions to perform metal surface prep on the exhaust manifold mating surface of the cylinder head. Follow this installation procedure by using six new RH exhaust manifold studs that need to be tightened to 12 Nm (106 lb-in). The process of exhaust leak prevention requires two-stage torque tightening of new exhaust manifold nuts beginning with a torque of 20 Nm (177 lb-in) followed by a torque of 25 Nm (18 lb-ft). Install the RH exhaust manifold first using a new gasket before the torque sequence starts. The RH HO2S electrical connector needs to be restored while the RH catalytic converter must be installed.