How to service and repair the rear brake line on Lincoln MKX?

The service and repair of rear brake flexible hose starts by removing the wheel together with tire. Water down the brake caliper flow bolt by removing the two copper washers then throw them out before tightening the new bolt to 25 Nm (18 lb-ft). The procedure requires disconnecting the brake tube fitting from the brake flexible hose while torquing it to 17 Nm (13 lb-ft) during the reinstallation step. The maintenance proceeds with removal of brake flexible hose retaining clip before brake hose bracket bolt removal and subsequent brake hose installation requiring a torque of 15 Nm (11 lb-ft). Proceed with uninstalling the new components while bleaching the brake caliper according to the inverted installation protocol. Use only new brake fluid that meets manufacturer standards to avoid system destruction while cleaning all contaminated areas with water immediately after a brake fluid leak on painted or plastic surfaces. Emergency medical information about brake fluid is available at the US and Canadian phone number 1-800-959-3673 or through the Product Material Safety Data Sheet (MSDS) as provided.

How to Service and Repair the Front Brake Line on Lincoln MKX?

The service and maintenance of front brake flexible hoses requires brake fluid specified by the manufacturer with new liquid instead of reusing drained fluid because it will cause contamination and system damage. Customers of Ford/Motorcraft products should call 1-800-959-3673 to seek emergency medical help when needed in the US and Canada. Additionally customers must read the product label warnings carefully before proceeding. Any brake fluid losses on painted or plastic elements need an immediate wash with water to prevent damage. Begin by removing the brake caliper flow bolt while discarding both copper washers before installing new copper washers and securing them tightly to 25 Nm (18 lb-ft). Secondly remove the brake tube fitting from the brake flexible hose but reassemble it with 17 Nm (13 lb-ft) torque. Begin by eliminating the brake flexible hose retaining clip before removing the brake flexible hose bracket bolt as well as the hose itself that needs proper torque of 20 Nm (15 lb-ft). After finishing the service complete the process by bleeding the brake system and performing the reverse procedure order.

OEM Lincoln MKX Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Brake Lines found

View related parts
Lincoln MKX Flex Hose, Front Passenger Side Part Number: F2GZ-2078-H
$29.54 MSRP: $46.91
You Save: $17.37 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Passenger Side
- Replaces: BRHF-172, BRHF-152, F2GZ-2078-B, F2GZ-2078-F, BRHF-71, F2GZ-2078-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Flex Hose, Rear Part Number: 8T4Z-2A442-A
$17.00 MSRP: $23.14
You Save: $6.14 (27%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Lincoln MKX | Base | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKX Flex Hose, Passenger Side Part Number: F2GZ-2282-G
$10.77 MSRP: $17.36
You Save: $6.59 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Right; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaces: BRHR-107, BRHR-146, BRHR-178, BRHR-234, F2GZ-2282-C, G2GZ-2282-D, G2GZ-2282-B, F2GZ-2282-E, F2GZ-2282-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Flex Hose, Driver Side Part Number: F2GZ-2282-H
$10.49 MSRP: $17.04
You Save: $6.55 (39%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Replaces: BRHR-134, BRHR-183, F2GZ-2282-F, F2GZ-2282-D, F2GZ-2282-B, G2GZ-2282-C, BRHR-147, BRHR-233, G2GZ-2282-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Flex Hose, Front Driver Side Part Number: F2GZ-2078-G
$24.45 MSRP: $39.45
You Save: $15.00 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Driver Side
- Replaces: BRHF-166, BRHF-151, BRHF-226, BRHF-167, BRHF-135, F2GZ-2078-C, F2GZ-2078-E, G2GZ-2078-F, G2GZ-2078-D, G2GZ-2078-A, G2GZ-2078-E, BRHF-227, G2GZ-2078-C, G2GZ-2078-B, BRHF-168, F2GZ-2078-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Flex Hose, Passenger Side Part Number: BT4Z-2282-A
$39.50 MSRP: $62.73
You Save: $23.23 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2015 Lincoln MKX | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Flex Hose, Front Part Number: 8T4Z-2078-A
$39.39 MSRP: $62.55
You Save: $23.16 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front
- Replaces: 7T4Z-2078-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2015 Lincoln MKX | Base | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Pipe, Front Passenger Side Part Number: 8T4Z-2A335-B
Product Specifications
- Other Name: Pipe - Brake; Brake Hydraulic Line, Front Right
- Position: Front Passenger Side
- Replaces: 7T4Z-2A335-A, 7T4Z-2A335-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Lincoln MKX | Base | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKX Brake Tube Part Number: 8T4Z-2286-B
Product Specifications
- Other Name: Tube Assembly - Brake; Brake Line
- Replaces: 7T4Z-2286-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Lincoln MKX | Base | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKX Brake Tube, Driver Side Part Number: 7T4Z-2264-A
Product Specifications
- Other Name: Tube Assembly - Brake; Brake Line
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Lincoln MKX | Base | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKX Brake Line Part Number: 7T4Z-2C296-A
Product Specifications
- Other Name: Tube Assembly - Brake; Brake Hydraulic Line
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Lincoln MKX | Base | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKX Brake Tube Part Number: 7T4Z-2286-A
Product Specifications
- Other Name: Tube Assembly - Brake; Brake Line
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007 Lincoln MKX | Base | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKX Flex Hose, Driver Side Part Number: BT4Z-2282-B
$42.76 MSRP: $66.73
You Save: $23.97 (36%)
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2015 Lincoln MKX | Base | 6 Cyl 3.7 L GAS

Lincoln MKX Brake Line

OEM Brake Line boasts unmatched quality. Each part goes through full quality checks. They adhere to Lincoln's official factory standards. These steps remove flaws and inconsistencies. So you can get Brake Line with long life and a perfect fit. Come to our website and find genuine Lincoln MKX parts. We keep a wide inventory of OEM MKX parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Lincoln MKX Brake Line is a significant part that hastens the brake fluid from the master cylinder to the brake caliper pistons to allow the hydraulic brake system. It is common for the metal brake lines to rust and also to be damaged by impact from within and outside the car in a way that will compromise its functionality by allowing fluid leakage and ultimately loss of pressure. Another area of concern in brake system is wear on the brake hoses; it may end up being physically or internally damaged to affect the brake function. In case of replacement, preformed brake line kits and corrosion free stainless steel brake hoses are easy to install. Going to a solid braid stainless steel hose entails a much firmer, more direct feel in the pedals for performance driving conditions.

Lincoln MKX Brake Line Parts and Q&A

Brake Tube, Driver Side
7T4Z-2264-A
Q: How to service and repair the rear brake line on Lincoln MKX?
A:
The service and repair of rear brake flexible hose starts by removing the wheel together with tire. Water down the Brake Caliper flow bolt by removing the two copper washers then throw them out before tightening the new bolt to 25 Nm (18 lb-ft). The procedure requires disconnecting the brake tube fitting from the brake flexible hose while torquing it to 17 Nm (13 lb-ft) during the reinstallation step. The maintenance proceeds with removal of brake flexible hose retaining clip before brake hose bracket bolt removal and subsequent brake hose installation requiring a torque of 15 Nm (11 lb-ft). Proceed with uninstalling the new components while bleaching the brake caliper according to the inverted installation protocol. Use only new brake fluid that meets manufacturer standards to avoid system destruction while cleaning all contaminated areas with water immediately after a brake fluid leak on painted or plastic surfaces. Emergency medical information about brake fluid is available at the US and Canadian phone number 1-800-959-3673 or through the Product Material Safety Data Sheet (MSDS) as provided.
Flex Hose, Front
8T4Z-2078-A
Q: How to Service and Repair the Front Brake Line on Lincoln MKX?
A:
The service and maintenance of front brake flexible hoses requires brake fluid specified by the manufacturer with new liquid instead of reusing drained fluid because it will cause contamination and system damage. Customers of Ford/Motorcraft products should call 1-800-959-3673 to seek emergency medical help when needed in the US and Canada. Additionally customers must read the product label warnings carefully before proceeding. Any brake fluid losses on painted or plastic elements need an immediate wash with water to prevent damage. Begin by removing the brake caliper flow bolt while discarding both copper washers before installing new copper washers and securing them tightly to 25 Nm (18 lb-ft). Secondly remove the brake tube fitting from the brake flexible hose but reassemble it with 17 Nm (13 lb-ft) torque. Begin by eliminating the brake flexible hose retaining clip before removing the brake flexible hose bracket bolt as well as the hose itself that needs proper torque of 20 Nm (15 lb-ft). After finishing the service complete the process by bleeding the brake system and performing the reverse procedure order.