How to service and repair the Trunk Lid Lift Support on Lincoln MKX?

A service repair of the power liftgate rod requires the removal of the LH quarter trim panel access cover. Press the clip on the power liftgate rod to disengage it from the motor assembly then raise the rod assembly while freeing it away. The service team must remove the cover along with its retaining nut while using threadlock to treat all fastener threads before securing it at 11 Nm (97 lb-in). You must take out the three power liftgate rod mounting bracket nuts before installation although you should securely tighten them to 30 Nm (22 lb-ft). To install and activate the power liftgate execute the opposite instructions of the removal sequence.

OEM Lincoln MKX Trunk Lid Lift Support

Lift Strut Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Trunk Lid Lift Supports found

View related parts
Lincoln MKX Lift Cylinder, Driver Side
Part Number: BA1Z-78406A11-A
$30.56 MSRP: $43.35
You Save: $12.79 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Liftgate Lift Support, Left; Back Glass Lift Support; Tailgate Lift Support; Door Lift Support; Support Cylinder; Liftgate Lift Support; Lift Support
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2015 Lincoln MKX | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Lift Cylinder, Passenger Side
Part Number: BA1Z-78406A10-A
$30.24 MSRP: $42.90
You Save: $12.66 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Liftgate Lift Support, Right; Back Glass Lift Support; Tailgate Lift Support; Door Lift Support; Support Cylinder; Liftgate Lift Support; Lift Support
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2015 Lincoln MKX | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Lift Cylinder, Driver Side
Part Number: 7A1Z-78406A11-B
$33.16 MSRP: $47.03
You Save: $13.87 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Back Glass, Liftgate, Tailgate, and Door Lift Support.; Support Cylinder
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Lincoln MKX | Base | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKX Lift Cylinder, Passenger Side
Part Number: 7A1Z-78406A10-B
$30.15 MSRP: $42.77
You Save: $12.62 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Back Glass, Liftgate, Tailgate, and Door Lift Support.; Support Cylinder
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Lincoln MKX | Base | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKX Lift Cylinder, Driver Side
Part Number: FA1Z-58406A11-A
$57.41 MSRP: $83.57
You Save: $26.16 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Back Glass, Liftgate, Tailgate, and Door Lift Support.; Support Cylinder
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Lift Cylinder, Passenger Side
Part Number: FA1Z-58406A10-A
$57.33 MSRP: $83.45
You Save: $26.12 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Back Glass, Liftgate, Tailgate, and Door Lift Support.; Support Cylinder
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Lift Cylinder, Passenger Side
Part Number: FA1Z-58406A10-B
$141.89 MSRP: $206.53
You Save: $64.64 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lift Assembly - Gas; Back Glass, Liftgate, Tailgate, and Door Lift Support.; Support Cylinder; Actuator
- Manufacturer Note: RH Only
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Lift Cylinder, Passenger Side
Part Number: 7A1Z-78406A10-A
Product Specifications
- Other Name: Lift Assembly - Gas; Back Glass, Liftgate, Tailgate, and Door Lift Support.; Support Cylinder
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Lincoln MKX | Base | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKX Lift Cylinder, Driver Side
Part Number: 7A1Z-78406A11-A
Product Specifications
- Other Name: Lift Assembly - Gas; Back Glass, Liftgate, Tailgate, and Door Lift Support.; Support Cylinder
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Lincoln MKX | Base | 6 Cyl 3.5 L GAS

Lincoln MKX Trunk Lid Lift Support

Welcome to our website where you can discover high-quality, genuine Lincoln MKX Trunk Lid Lift Support. We offer an extensive inventory of OEM Lincoln MKX Trunk Lid Lift Support at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Lincoln MKX Trunk Lid Lift Support Parts Questions & Experts Answers

Lift Cylinder, Passenger Side
7A1Z-78406A10-A
Q: How to service and repair the Trunk Lid Lift Support on Lincoln MKX?
A: A service repair of the power liftgate rod requires the removal of the LH quarter trim panel access cover. Press the clip on the power liftgate rod to disengage it from the motor assembly then raise the rod assembly while freeing it away. The service team must remove the cover along with its retaining nut while using threadlock to treat all fastener threads before securing it at 11 Nm (97 lb-in). You must take out the three power liftgate rod mounting bracket nuts before installation although you should securely tighten them to 30 Nm (22 lb-ft). To install and activate the power liftgate execute the opposite instructions of the removal sequence.