How to Service and Repair the Wiper Arm and Pivot Shaft on Lincoln Town Car?

To replace the wiper mounting arm and pivot shaft connect, unconnect the battery, cowl panel grilles and extract the assembly. Disassemble the electrical connector, replace the assembly, and tighten the nuts and bolts to 12 Nm and reconnect the battery, observing the pivot arm of the wiper.

How to service the wiper arm on Lincoln Town Car?

To service the wiper arm, disconnection of battery, disremoval of cowl panel grilles, and disremoval of the wiper mounting and pivot shaft assembly takes place. Insert the electrical connector, fit the assembly, screw nuts and bolts up to 12 Nm, attach the grilles again, reconnect the battery and check the adjustment.

OEM Lincoln Town Car Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Wiper Arms found

View related parts
Lincoln Town Car Wiper Arm, Driver Side Part Number: F7AZ-17527-AA
Product Specifications
- Other Name: Arm Assembly - Wiper
- Position: Driver Side
- Replaces: F5AZ-17527-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1997 Lincoln Town Car | Anniversary, Base, Cartier, Cypress, Executive, Jack Nicklaus, Signature, Touring Edition, Tournament Edition | 8 Cyl 4.6 L GAS
View related parts
Lincoln Town Car Wiper Arm, Passenger Side Part Number: 4W1Z-17526-AA
Product Specifications
- Other Name: Arm Assembly - Wiper
- Position: Passenger Side
- Replaces: F8VZ-17526-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2011 Lincoln Town Car | Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Lincoln Town Car Wiper Arm, Driver Side Part Number: 4W1Z-17527-AA
Product Specifications
- Other Name: Arm Assembly - Wiper
- Position: Driver Side
- Replaces: F8VZ-17527-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2011 Lincoln Town Car | Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Lincoln Town Car Wiper Arm, Passenger Side Part Number: F7AZ-17526-AA
Product Specifications
- Other Name: Arm Assembly - Wiper
- Position: Passenger Side
- Replaces: F5AZ-17526-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1997 Lincoln Town Car | Anniversary, Base, Cartier, Cypress, Executive, Jack Nicklaus, Signature, Touring Edition, Tournament Edition | 8 Cyl 4.6 L GAS

Lincoln Town Car Wiper Arm

Welcome to our website where you can discover high-quality, genuine Lincoln Town Car Wiper Arm. We offer an extensive inventory of OEM Lincoln Town Car Wiper Arm at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Lincoln Town Car Wiper Arm Parts and Q&A

Wiper Arm, Driver Side
4W1Z-17527-AA
Q: How to Service and Repair the Wiper Arm and Pivot Shaft on Lincoln Town Car?
A: To replace the wiper mounting arm and pivot shaft connect, unconnect the battery, cowl panel grilles and extract the assembly. Disassemble the electrical connector, replace the assembly, and tighten the nuts and bolts to 12 Nm and reconnect the battery, observing the pivot arm of the wiper.
Wiper Arm, Passenger Side
4W1Z-17526-AA
Q: How to service the wiper arm on Lincoln Town Car?
A: To service the wiper arm, disconnection of battery, disremoval of cowl panel grilles, and disremoval of the wiper mounting and pivot shaft assembly takes place. Insert the electrical connector, fit the assembly, screw nuts and bolts up to 12 Nm, attach the grilles again, reconnect the battery and check the adjustment.