How to service and repair the muffler and tailpipe on Lincoln Zephyr?

In order to fix muffler and tailpipe, make sure the motor is on neutral on a hoist. Install the jackstands, take off the Torca clamp, and disconnect the muffler and the tailpipe. Repeat the process but in the reverse order to install new parts and test exhaust leaks. Isolators should not be covered with oil or grease, which would lead to its deterioration.

OEM Lincoln Zephyr Muffler

Exhaust Muffler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Mufflers found

View related parts
Lincoln Zephyr Muffler & Pipe, Front Part Number: 9E5Z-5230-F
$925.88 MSRP: $1228.36
You Save: $302.48 (25%)
Product Specifications
- Other Name: Muffler Assembly - Centre And Rear; Direct-Fit Exhaust System Kit; Y Pipe; Exhaust Pipe; Muffler
- Position: Front
- Replaces: 6E5Z-5230-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006 Lincoln Zephyr | Base | 6 Cyl 3.0 L GAS
View related parts
Lincoln Zephyr Muffler & Pipe, Rear Part Number: 6E5Z-5230-BA
Product Specifications
- Other Name: Muffler Assembly - Centre And Rear; Direct-Fit Exhaust System Kit; Y Pipe; Exhaust Pipe; Muffler
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006 Lincoln Zephyr | Base | 6 Cyl 3.0 L GAS

Lincoln Zephyr Muffler

Welcome to our website where you can discover high-quality, genuine Lincoln Zephyr Muffler. We offer an extensive inventory of OEM Lincoln Zephyr Muffler at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Lincoln Zephyr Muffler Parts and Q&A

Muffler & Pipe, Front
9E5Z-5230-F
Q: How to service and repair the muffler and tailpipe on Lincoln Zephyr?
A: In order to fix muffler and tailpipe, make sure the motor is on neutral on a hoist. Install the jackstands, take off the Torca clamp, and disconnect the muffler and the tailpipe. Repeat the process but in the reverse order to install new parts and test exhaust leaks. Isolators should not be covered with oil or grease, which would lead to its deterioration.