Begin the steering wheel servicing by moving it straight ahead then shutting down the ignition system with the switch and key removal. The service begins by uninstalling the driver
Air Bag module. The recommendation for initiating steering wheel and column shaft installation requires proper marking of reference points. Prior to wheel assembly the nut requires tightening until it reaches 35 Nm (26 ft. lbs.). The electrical connector for the steering wheel switches should be detached first but the steering wheel removal process requires avoiding impact to the shaft with a hammer because it might damage the column. A suitable puller is your only proper solution to remove a steering wheel. After finishing the installation process revert to the reverse sequence of the removal moves and utilize the reference mark to align the steering wheel.