How to service and repair the front brake pads on Mercury Cougar?

Service and repair of front brake pads starts with disconnecting wheel nuts followed by lifting and supporting the whole vehicle until the wheel can be removed. The first step before installing new brake pads involves removing the brake pad retaining clip with simultaneous disconnect of brake pad wear sensor electrical connector when present. Detach the caliper by removing bolt covers and bolts then safely move the caliper out of work area so as not to harm the flexible brake hose. Destroy the brake pads by removing both their inner and outer sections. Full piston retraction of the brake disc caliper should happen before pad installation so that clean brake disc face surfaces can be exposed for the inner pad placement and then outer pad installation. Screw the caliper into place by using the bolts before placing the bolt covers. If your brake system has a pad wear sensor electrical connector you should use it as the final step along with installing the pad retaining clip.

OEM Mercury Cougar Brake Pads

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Pads found

View related parts
Mercury Cougar Brake Pads
Part Number: 2U2Z-2V001-JA
$28.36 MSRP: $38.59
You Save: $10.23 (27%)
ADD TO CART
Product Specifications
- Other Name: Pad; Disc Brake Pad Set; Front Pads
- Replaces: XS8Z-2001-BA, XU2Z-2V001-XA, XS8Z-2001-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2002 Mercury Cougar | Base, S, V6 | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mercury Cougar Front Pads
Part Number: 2U2Z-2V001-FA
$8.13 MSRP: $11.25
You Save: $3.12 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad; Brake Pads
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1991-1992 Mercury Cougar | LS, XR-7 | 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Cougar Rear Pads
Part Number: 1U2Z-2V200-NA
$6.34 MSRP: $8.77
You Save: $2.43 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Shoe And Hardware; Disc Brake Pad Set; Brake Pads
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1997 Mercury Cougar | XR-7 | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Cougar Rear Shoes
Part Number: 2U2Z-2V200-AARM
Product Specifications
- Other Name: Remanufactured Kit - Brake Shoe And Lining; Parking Brake Shoe; Drum Brake Shoe; Shoes
- Replaces: XU2Z-2V200-BARM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-1988 Mercury Cougar | Base, LS, XR-7 | 4 Cyl 2.3 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Cougar Brake Pads
Part Number: 2S8Z-2001-AA
Product Specifications
- Other Name: Kit - Caliper Brake; Disc Brake Pad Set; Front Pads; Kit - Caliper Brake Pad
- Manufacturer Note: Built before 5,26,99 , SVT
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2002 Mercury Cougar | Base, S, V6 | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

Mercury Cougar Brake Pads

Welcome to our website where you can discover high-quality, genuine Mercury Cougar Brake Pads. We offer an extensive inventory of OEM Mercury Cougar Brake Pads at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Cougar Brake Pads Parts Questions & Experts Answers

Brake Pads
2S8Z-2001-AA
Q: How to service and repair the front brake pads on Mercury Cougar?
A: Service and repair of front brake pads starts with disconnecting wheel nuts followed by lifting and supporting the whole vehicle until the wheel can be removed. The first step before installing new brake pads involves removing the brake pad retaining clip with simultaneous disconnect of brake pad wear sensor electrical connector when present. Detach the caliper by removing bolt covers and bolts then safely move the caliper out of work area so as not to harm the flexible brake hose. Destroy the brake pads by removing both their inner and outer sections. Full piston retraction of the Brake Disc caliper should happen before pad installation so that clean brake disc face surfaces can be exposed for the inner pad placement and then outer pad installation. Screw the caliper into place by using the bolts before placing the bolt covers. If your brake system has a pad wear sensor electrical connector you should use it as the final step along with installing the pad retaining clip.