How to remove and reinstall the front Center Console Base on Mercury Montego?

The first step to remove the front floor console requires removal of the floor shifter trim ring and floor console center finish panel. You will start by taking out the two securing screws from the front of the console and then unplug the left-hand and right-hand finish panels. When replacing the panel you should use a force of 110 Nm (81 lb-ft) to tighten the Dylock point located in front of the panel. You should initially remove the four front floor console bolts followed by tightening them to 5 Nm (44 lb-in) when finishing the installation. Disengage the power point electric connection before taking off the floor console. Constructing the console requires that you perform the reversal of previous removal steps.

OEM Mercury Montego Center Console Base

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Center Console Bases found

View related parts
Mercury Montego Finish Panel Part Number: 5G1Z-54045A76-BAH
Product Specifications
- Other Name: Panel Assembly - Console
- Manufacturer Note: (-7*)
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Finish Panel Part Number: 5G1Z-54045A76-BAF
Product Specifications
- Other Name: Panel Assembly - Console
- Manufacturer Note: (-T*)
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Finish Panel Part Number: 5G1Z-54045A76-BAD
Product Specifications
- Other Name: Panel Assembly - Console
- Manufacturer Note: (-T*)
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Finish Panel Part Number: 5G1Z-54045A76-BAC
Product Specifications
- Other Name: Panel Assembly - Console
- Manufacturer Note: (-7*)
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Console, Charcoal, Center Lower Part Number: 5G1Z-54045A36-AAD
Product Specifications
- Other Name: Panel Assembly - Console; Center Console, Center Lower
- Manufacturer Note: (-W*)
- Position: Center Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Console, Center Lower Part Number: 5G1Z-54045A36-AAC
Product Specifications
- Other Name: Panel Assembly - Console; Center Console, Center Lower
- Manufacturer Note: (-T*)
- Position: Center Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Console Part Number: 5G1Z-54045A36-AAA
Product Specifications
- Other Name: Panel Assembly - Console
- Manufacturer Note: (-7*)
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Rear Panel Trim, Charcoal, Front Part Number: 5F9Z-74045E24-BAD
Product Specifications
- Other Name: Panel Assembly - Console; Console Panel, Front Rearward; Console Trim Panel, Rear
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Rear Panel Trim, Front Part Number: 5F9Z-74045E24-BAC
Product Specifications
- Other Name: Panel Assembly - Console; Console Panel, Front Rearward; Console Trim Panel, Rear
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Rear Panel Trim, Front Part Number: 5F9Z-74045E24-BAA
Product Specifications
- Other Name: Panel Assembly - Console; Console Panel, Front Rearward
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Finish Panel, Charcoal Part Number: 5G1Z-54045A76-BAG
Product Specifications
- Other Name: Panel Assembly - Console
- Manufacturer Note: (-W*)
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Premier | 6 Cyl 3.0 L GAS

Mercury Montego Center Console Base

OEM Center Console Base boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Center Console Base with long life and a perfect fit. Come to our website and find genuine Mercury Montego parts. We keep a wide inventory of OEM Montego parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Mercury Montego Center Console Base establishes itself as an essential part which maximizes organizational capabilities in all Mercury Montego vehicles. Users can appreciate the Center Console Base because it offers dependable operation alongside premium functions which dedicate storage for phones and keys and money with an intention to improve driver convenience. Different designs of both first and second-generation Montego use the Center Console Base which integrates with these models to showcase new technological developments through upgraded storage capacities and easy-access features. The adaptable nature of the Mercury Montego improves both the car's livability as well as its efficiency and safety features during driving. User-friendly design choices in the Center Console Base make it distinctive in the automotive market while delivering the typical Mercury brand quality and standards. Features of spacious compartments and user-friendly layout in the Mercury Montego's Center Console Base form an essential feature for its universal appeal. The Center Console Base demonstrates the combination between functionality and style that the automaker model drivers have learned to treasure from their ownership experience. The car Center Console Base serves beyond storage needs by improving driving experience and stands as a defining attribute across the car product range.

Mercury Montego Center Console Base Parts and Q&A

Finish Panel
5G1Z-54045A76-BAD
Q: How to remove and reinstall the front Center Console Base on Mercury Montego?
A:
The first step to remove the front floor console requires removal of the floor shifter trim ring and floor console center finish panel. You will start by taking out the two securing screws from the front of the console and then unplug the left-hand and right-hand finish panels. When replacing the panel you should use a force of 110 Nm (81 lb-ft) to tighten the Dylock point located in front of the panel. You should initially remove the four front floor console bolts followed by tightening them to 5 Nm (44 lb-in) when finishing the installation. Disengage the power point electric connection before taking off the floor console. Constructing the console requires that you perform the reversal of previous removal steps.