How to Service the Fuel Pump Driver Module on Mercury Montego?

Start the service of the Fuel Pump Driver Module by disconnecting the battery ground cable. The Five Hundred service requires technicians to take away the rear seat cushion together with the rear corner backrest. The service requires removal of the C-pillar trim panel when performing on the Freestyle model. The removal process begins with disconnecting the electrical connector from the fuel pump driver module (FPDM) while removing its associated two nuts. After installing the new FPDM, users should fasten the nuts to 5 Nm (44 lb-in) torque and then undertake the installation process in reverse order to finish the task.

OEM Mercury Montego Fuel Pump Driver Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pump Driver Module found

View related parts
Mercury Montego Control Module Part Number: 6F9Z-9D370-AA
$111.29 MSRP: $216.00
You Save: $104.71 (49%)
ADD TO CART
Product Specifications
- Other Name: Control Unit
- Replaces: 5F9Z-9D370-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS

Mercury Montego Fuel Pump Driver Module

OEM Fuel Pump Driver Module boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Fuel Pump Driver Module with long life and a perfect fit. Come to our website and find genuine Mercury Montego parts. We keep a wide inventory of OEM Montego parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Mercury Montego Fuel Pump Driver Module Parts and Q&A

Control Module
6F9Z-9D370-AA
Q: How to Service the Fuel Pump Driver Module on Mercury Montego?
A:
Start the service of the Fuel Pump Driver Module by disconnecting the battery ground cable. The Five Hundred service requires technicians to take away the rear Seat Cushion together with the rear corner backrest. The service requires removal of the C-pillar trim panel when performing on the Freestyle model. The removal process begins with disconnecting the electrical connector from the fuel pump driver module (FPDM) while removing its associated two nuts. After installing the new FPDM, users should fasten the nuts to 5 Nm (44 lb-in) torque and then undertake the installation process in reverse order to finish the task.