How to Service the Fuel Pressure Sensor on the Fuel Rail on Mercury Monterey?

In order to service the fuel rail pressure and temperature sensor, remove the battery ground cable and release the fuel system pressure. Unscrew the electrical connector, vacuum hose and the two bolts holding the sensor. Install in the new sensor, tightening the bolts to 5 Nm and lubricate the O-ring seal and reassemble.

OEM Mercury Monterey Fuel Pressure Sensor

Fuel Tank Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pressure Sensor found

View related parts
Mercury Monterey Pressure Sensor Part Number: 3F2Z-9G756-AC
$84.64 MSRP: $139.27
You Save: $54.63 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Fuel Injector Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Damper; Fuel Pressure Sensor; Damper
- Manufacturer Note: Also serviced in 9F792. Mounting screws W705870-S437, 6.8L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Mercury Monterey | Base, Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS

Mercury Monterey Fuel Pressure Sensor

Welcome to our website where you can discover high-quality, genuine Mercury Monterey Fuel Pressure Sensor. We offer an extensive inventory of OEM Mercury Monterey Fuel Pressure Sensor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Monterey Fuel Pressure Sensor Parts and Q&A

Pressure Sensor
3F2Z-9G756-AC
Q: How to Service the Fuel Pressure Sensor on the Fuel Rail on Mercury Monterey?
A: In order to service the fuel rail pressure and temperature sensor, remove the battery ground cable and release the fuel system pressure. Unscrew the electrical connector, vacuum hose and the two bolts holding the sensor. Install in the new sensor, tightening the bolts to 5 Nm and lubricate the O-ring seal and reassemble.