How to service and repair the front fender on Mercury Mountaineer?

Service and repair of the front fender starts by detaching the grille opening panel reinforcement and the front bumper (17757). Start by removing the front panel of the rocker panel trim or the running board (s) if the vehicle has them and proceed to take off the front wheel with tire. Members of the service team need to detach the front fender apron (16054) by unscrewing the screws and bolts before lower fender to rocker panel bolts go along with spacers. The fender bolt can be accessed through an open front door whereby you should also extract the fender bolt and fender to front fender radiator support brace bolt. For removing the right-hand front fender the speed control servo (9C735) requires movement to another location after bolt removal as well as antenna removal. Begin the front fender (16005) removal by detaching its top fender to inner fender bolts. To install start by mounting the front fender then use top fender to inner fender bolts for securing it. The right-hand front fender reinstallation requires positioning the speed control servo bracket with the antenna and bolt installation. To connect the fender with the front fender radiator support brace bolt maintain full access through the open front door for top fender to inner fender bolt insertion. Implement the fender to rocker panel bolts together with spacers before positioning the front fender apron and sealing it with front fender to front fender apron screws and top fender to inner fender bolts. The repair ends with the installation of front wheel and tire assembly together with the front panel of the rocker panel trim when present and the front bumper and grille opening panel reinforcement.

OEM Mercury Mountaineer Fender

Wheel Fender

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fenders found

View related parts
Mercury Mountaineer Fender, Front Passenger Side Part Number: XL2Z-16005-CA
$207.74 MSRP: $282.69
You Save: $74.95 (27%)
ADD TO CART
Product Specifications
- Other Name: Fender Assembly - Front; Fender, Front Right
- Manufacturer Note: R.H., , Sport Plus , w/large wheel lip mouldings
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2001 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Mountaineer Fender, Front Driver Side Part Number: XL2Z-16006-CA
$365.97 MSRP: $502.12
You Save: $136.15 (28%)
ADD TO CART
Product Specifications
- Other Name: Fender Assembly - Front; Fender, Front Left
- Manufacturer Note: L.H., , Sport Plus , w/large wheel lip mouldings
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2001 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Mountaineer Fender, Front Driver Side Part Number: XL2Z-16006-DA
$331.78 MSRP: $455.21
You Save: $123.43 (28%)
ADD TO CART
Product Specifications
- Other Name: Fender Assembly - Front; Fender, Front Left
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2001 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Mountaineer Fender, Front Passenger Side Part Number: XL2Z-16005-DA
$331.78 MSRP: $455.21
You Save: $123.43 (28%)
ADD TO CART
Product Specifications
- Other Name: Fender Assembly - Front; Fender, Front Right
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2001 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
Mercury Mountaineer Fender, Front Passenger Side Part Number: 1L2Z-16005-DA
$125.71 MSRP: $173.90
You Save: $48.19 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender Assembly - Front
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2010 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Mercury Mountaineer Fender, Front Driver Side Part Number: 1L2Z-16006-DA
Product Specifications
- Other Name: Fender Assembly - Front
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2010 Mercury Mountaineer | Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

Mercury Mountaineer Fender

OEM Fender boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Fender with long life and a perfect fit. Come to our website and find genuine Mercury Mountaineer parts. We keep a wide inventory of OEM Mountaineer parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Mercury Mountaineer Fender is a crucial vehicle part that demonstrates the vehicle's proven reliability and high performance. Both the vehicle and nearby area find safeguard through the fender design since it prevents wheel well-dislodged debris from flying into the surroundings to protect pedestrians while safeguarding adjacent vehicles. The Mercury Mountaineer kept its standard fender design active over its manufacturing journey from 1997 to 2010 which enabled the use of interchangeable parts for all Mountaineer models thus boosting its sustainability popularity. Its solid build design protects the Mercury Mountaineer from road harm while producing an appealing look to the vehicle. The Mercury Mountaineer Fender was developed to match the premium interior and performance functions which incorporate V6 and V8 engine options. The fender design stick to functional priorities to maintain clean efficient performance in Mercury automobile vehicles. During the second-gen car era the fender achieved unique stylistic prominence that made it stand out from other vehicles on the market. The the automaker model Fender proves its worth through its body-on-frame structure and well-thought-out design because it makes the vehicle more efficient and safer and helps build the car's reputation as a trusted mid-size luxury SUV model.

Mercury Mountaineer Fender Parts and Q&A

Fender, Front Passenger Side
XL2Z-16005-DA
Q: How to service and repair the front fender on Mercury Mountaineer?
A:
Service and repair of the front fender starts by detaching the grille opening panel reinforcement and the front Bumper (17757). Start by removing the front panel of the rocker panel trim or the running board (s) if the vehicle has them and proceed to take off the front wheel with tire. Members of the service team need to detach the front fender apron (16054) by unscrewing the screws and bolts before lower fender to rocker panel bolts go along with spacers. The fender bolt can be accessed through an open front door whereby you should also extract the fender bolt and fender to front fender radiator support brace bolt. For removing the right-hand front fender the speed control servo (9C735) requires movement to another location after bolt removal as well as antenna removal. Begin the front fender (16005) removal by detaching its top fender to inner fender bolts. To install start by mounting the front fender then use top fender to inner fender bolts for securing it. The right-hand front fender reinstallation requires positioning the speed control servo bracket with the antenna and bolt installation. To connect the fender with the front fender radiator support brace bolt maintain full access through the open front door for top fender to inner fender bolt insertion. Implement the fender to rocker panel bolts together with spacers before positioning the front fender apron and sealing it with front fender to front fender apron screws and top fender to inner fender bolts. The repair ends with the installation of front wheel and tire assembly together with the front panel of the rocker panel trim when present and the front bumper and grille opening panel reinforcement.