How to service the rear Tail Light assembly of the wagon on Mercury Sable?

To remove the rear lamp assembly of the wagon, open the liftgate and take out the screws that hold the assembly. Pull carefully the assembly back and unplug the bulb sockets. Installation To install, use the reverse steps to fix the new or repair assembly.

How to service the rear Tail Light assembly on a four-door on Mercury Sable?

Removing the scuff plate and carpet, electrical connector and unscrewing the securing nuts allow access to the rear lamp assembly of a four-door car. Lift the assembly out, take out the bulb connectors, and follow the reversal to install, be sure the rubber grommet is in place to keep the water out.

OEM Mercury Sable Tail Light

Tail Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Tail Lights found

View related parts
Mercury Sable Tail Lamp Assembly, Rear Passenger Side Part Number: YF4Z-13404-BA
$118.52 MSRP: $161.28
You Save: $42.76 (27%)
ADD TO CART
Product Specifications
- Other Name: Lamp Assembly - Rear, Stop; Back Up Light; Tail Light
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2003 Mercury Sable | GS, LS, LS Premium | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Tail Lamp Assembly, Driver Side Part Number: YF4Z-13405-BA
Product Specifications
- Other Name: Lamp Assembly; Tail Light Assembly; Back Up Light; Tail Lamps; Tail Light
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2003 Mercury Sable | GS, LS, LS Premium | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

Mercury Sable Tail Light

Welcome to our website where you can discover high-quality, genuine Mercury Sable Tail Light. We offer an extensive inventory of OEM Mercury Sable Tail Light at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Sable Tail Light Parts and Q&A

Tail Lamp Assembly, Rear Passenger Side
YF4Z-13404-BA
Q: How to service the rear Tail Light assembly of the wagon on Mercury Sable?
A: To remove the rear lamp assembly of the wagon, open the liftgate and take out the screws that hold the assembly. Pull carefully the assembly back and unplug the bulb sockets. Installation To install, use the reverse steps to fix the new or repair assembly.
Tail Lamp Assembly, Driver Side
YF4Z-13405-BA
Q: How to service the rear Tail Light assembly on a four-door on Mercury Sable?
A: Removing the scuff plate and carpet, electrical connector and unscrewing the securing nuts allow access to the rear lamp assembly of a four-door car. Lift the assembly out, take out the bulb connectors, and follow the reversal to install, be sure the rubber grommet is in place to keep the water out.