OEM Mercury Villager Glove Box

Mercury Villager Glove Box Parts Questions & Experts Answers

• Storage Compart
  F58Z1606010B
  Q: How to Service and Repair the Glove Box on Mercury Villager?

  A: The repair or servicing of the glove box starts with removing the battery ground cable. The ashtray/cup holder assembly needs release of its locking tabs together with electrical connector detachment before removal. Proceed by removing the console cover through the disassembly of its four pin-type retainers. The instrument panel center finish panel needs to be removed after disconnecting its screws. Open the glove box through glove box stops and drop it down to access the inside compartment. Unscrew the Air Bag module electrical connector access panel by disconnecting its electrical connection. The glove box assembly should be removed by unscrewing the locking mechanisms and unbolting it and by disconnecting the glove box latch electrical connector. Installation of the component requires performing the steps in reverse order. During these moments the vehicle will experience various abnormal drive symptoms because it needs to relearn its adaptive strategy through driving operations exceeding 16 km (10 miles).