My Garage
Cart
Make sure this part fits

Ford 6S4Z-2005-AA
Brake Booster

2000-2008 Ford Focus 6S4Z2005AA

Customer Questions & Expert Answers (8)
Ford 6S4Z-2005-AA Brake Booster
Ford 6S4Z-2005-AA Brake Booster
  • Part Description
    Booster Assembly - Brake; Power Brake Booster
  • Base No.
    2005
  • Replaces
    5S4Z-2005-A
  • Manufacturer
    Ford
Make sure this part fits
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.2005
    Manufacturer Part Number6S4Z-2005-AA
    Part DescriptionBooster Assembly - Brake; Power Brake Booster
    Other NamesBooster Assembly
    Item Dimensions13.5 x 13.3 x 11.7 inches
    Item Weight7.90 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces5S4Z-2005-A
    ManufacturerFord
    SKU6S4Z-2005-AA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2008 Ford FocusLX, S, SE, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 6S4Z-2005-AA the part I need for my vehicle? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 6S4Z-2005-AA fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the vacuum brake booster on Ford Focus? Posted by Customer
    A:
    Service and repair operations for vacuum brake boosters must start by taking out the master cylinder from all vehicles. The speed control unit must first be detached before lowering it on vehicles that have this feature installed. The first step requires the detachment of brake tubes and brake booster actuator rod through the process of depressing the clip followed by pin removal. The service procedure requires you to first detach then remove the booster device. Places where installation begins require checking that the brake booster actuator rod runs smoothly through the bulkhead rubber boot while the brake booster gasket aligns properly before setting it in place. The brake system needs a bleaching procedure following installation to achieve proper operation.
    Posted by FordPartsDeal Specialist
    Q:
    What should be disconnected from the brake master cylinder for the 2005 Ford Focus? Posted by Customer
    A:
    Disconnect the electrical connectors and twist to remove the switches, including the speed control deactivation switch (if equipped), stop lamp switch, and Clutch Pedal Position (CPP) switch for manual transmission vehicles.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Booster
    Q:
    How do you detach the brake booster actuating rod from the brake pedal for the 2004 Ford Focus? Posted by Customer
    A:
    Press the brake pedal, press the clip, and remove the pin.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Booster
    Q:
    What is crucial to do before removing the stoplamp switch and speed control deactivator switch for the 2008 Ford Focus? Posted by Customer
    A:
    Ensure the brake pedal is in the at-rest position, compressing the switch plungers to avoid damage.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Booster
    Q:
    What is the final step to complete the process for the 2001 Ford Focus? Posted by Customer
    A:
    Bleed the brake system.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Booster
    Q:
    What electrical components need to be disconnected during the process for the 2006 Ford Focus? Posted by Customer
    A:
    Disconnect the electrical connectors and twist to remove the switches, including the speed control deactivation switch (if equipped), stop lamp switch, and clutch pedal position (CPP) switch for manual transmission vehicles.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Booster
    Q:
    What should be done after removing the speed control actuator for the 2007 Ford Focus? Posted by Customer
    A:
    Remove the speed control actuator bolts and position the actuator aside, ensuring to tighten the bolts to 9 Nm (80 inch lbs.) upon reinstallation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Booster
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford 6S4Z-2005-AA, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # 6S4Z-2005-AA Brake Booster. It is sometimes referred to as Ford Brake Booster. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford 6S4Z2005AA Brake Booster. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery