Ford 2F4Z-17D957-CA
Bumper Cover, Front

The first step for front bumper cover removal on all vehicles requires headlamps removal and vehicle support through lifting. The first step includes unsettling five pin-type retainers located under the chin spoiler and next the air dam can be separated by removing seven screws and three bolts. Unscrew thirteen screws from the splash shields on LH and RH front fenders then dismiss their two pin-type retainers before proceeding to remove the front splash shields. The front bumper cover bolts need to come out while also taking out pin-type retainers and the radiator grille specifically on the Taurus model. The Bumper cover on Sable models needs to be unclipped from the support of the radiator grille opening while fog lamp electrical connectors should only be detached if present. Finish the process by taking out four front bumper cover bolts while directing the bumper cover clip outboard to detach it from the fender before completely removing the front bumper cover. The installation process requires following the opposite steps used for removal.

Take off the LH rear bumper cover to rear quarter panel nuts, followed by the RH rear bumper cover panel nuts and the rear bumper cover nuts.