Ford YL5Z-1310684-AA
Front Crossmember, Passenger Side

Service of transmission support crossmember requires placing the vehicle into NEUTRAL position on a hoist. Remove first the two transmission mount nuts from the transmission support crossmember before you tighten them to 90 Nm (66 lb-ft) when finishing the work. The transmission support requires a suitable jack to hold it in place instead of allowing it to hang unsupported. You need to take out two horizontal bolts and nuts which are installed on each side of the transmission support crossmember before reinstallation where you must torque them to 127 Nm (94 lb-ft). You should unwind the four vertical bolts and nuts that exist on both sides of the crossmember while reinstalling them using a torque of 99 Nm (73 lb-ft). The last step requires performing the reverse procedure for installing the transmission support crossmember.