My Garage
Cart
Make sure this part fits

Ford 8C2Z-1526604-BD
Handle, Outside

1992-2014 Ford 8C2Z1526604BD

Customer Questions & Expert Answers (19)
Ford 8C2Z-1526604-BD Handle, Outside
Ford 8C2Z-1526604-BD Handle, Outside
  • Part Description
    Handle Assembly - Door Outer; Exterior Door Handle
  • Base No.
    26600
  • Replaces
    8C2Z-1526604-BC, F2UZ-1526600-C, F5UZ-1526600-AAA
  • Manufacturer
    Ford
Make sure this part fits
$46.20 MSRP: $66.10
You Save: $19.90 (31%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2014 Ford E-150Base, Chateau, XL, XLT6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
    2003-2005 Ford E-150 Club WagonChateau, XL, XLT6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
    1992-2002 Ford E-150 EconolineBase, XL6 Cyl 4.2 L GAS, 6 Cyl 4.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
    1992-2002 Ford E-150 Econoline Club WagonChateau, Custom, XL, XLT6 Cyl 4.2 L GAS, 6 Cyl 4.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
    2003-2014 Ford E-250Base6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
    1992-2002 Ford E-250 EconolineBase, XL6 Cyl 4.2 L GAS, 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
    2003-2005 Ford E-350 Club WagonChateau, XL, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
    1992-1998 Ford E-350 EconolineBase, XL10 Cyl 6.8 L GAS, 6 Cyl 4.9 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.5 L GAS
    1992-2002 Ford E-350 Econoline Club WagonChateau, Chateau HD, Custom, Custom HD, XL, XL HD, XLT, XLT HD10 Cyl 6.8 L GAS, 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.5 L GAS
    1999-2014 Ford E-350 Super DutyBase, Chateau, XL, XLT10 Cyl 6.8 L CNG, 10 Cyl 6.8 L GAS, 10 Cyl 6.8 L LPG, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Will this 8C2Z-1526604-BD work in my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 8C2Z-1526604-BD fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    What is the procedure for removing the door handle on the sliding door for the 2003 Ford E-250? Posted by Customer
    A:
    Remove the nuts to take off the door handle.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Handle
    Q:
    How do you complete the installation after removing the door handle for the 2001 Ford E-150 Econoline? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to service and repair the front interior door handle for the 2006 Ford E-150? Posted by Customer
    A:
    Begin by removing the screw and the interior door handle trim cover.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Handle
    Q:
    How do you complete the installation for the 2008 Ford E-150? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Handle
    Q:
    How do you install the new handle for the 2009 Ford E-250? Posted by Customer
    A:
    To install the new handle, reverse the removal procedure and use the Heavy Duty Riveter to install new rivets.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to service the exterior sliding door handle for the 2004 Ford E-150? Posted by Customer
    A:
    Remove the sliding door latch remote control.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to service the rear door interior handle for the 2004 Ford E-250? Posted by Customer
    A:
    Begin by removing the door trim panel if it is equipped.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Handle
    Q:
    How do you complete the installation after removing the door handle for the 2003 Ford E-150? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after disengaging the interior door handle for the 2007 Ford E-250? Posted by Customer
    A:
    Release the cable conduit from the interior door handle and slide the cable end off the door handle pivot.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to service the rear door interior handle for the 2005 Ford E-250? Posted by Customer
    A:
    First, remove the door trim panel if it is equipped.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done for the front and sliding doors for the 2002 Ford E-150 Econoline? Posted by Customer
    A:
    Disconnect the outside door handle-to-latch rod from the retaining clip.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Handle
    Q:
    What is the procedure for removing the door handle on the sliding door for the 2001 Ford E-250 Econoline? Posted by Customer
    A:
    Remove the nuts to take off the door handle.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Handle
    Q:
    What is the torque specification for tightening the nuts when installing the new handle for the 2007 Ford E-150? Posted by Customer
    A:
    Ensure to tighten the nuts to 12 Nm (9 lb-ft).
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Handle
    Q:
    What is the torque specification for tightening the handle during installation for the 2006 Ford E-250? Posted by Customer
    A:
    Tighten the handle to 12 Nm (9 lb-ft).
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Handle
    Q:
    How do you complete the installation after removing the door handle for the 2000 Ford E-250 Econoline? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the sliding door latch remote control for the 2008 Ford E-250? Posted by Customer
    A:
    Next, take off the two nuts securing the exterior sliding door handle.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to service and repair the exterior sliding door handle for the 2005 Ford E-150? Posted by Customer
    A:
    First, remove the sliding door latch remote control.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to service the rear door interior handle for the 2009 Ford E-150? Posted by Customer
    A:
    If equipped, remove the door trim panel.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Handle, Outside 8C2Z-1526604-BD Designed for Proper Fit and Performance

The Ford part 8C2Z-1526604-BD Handle, Outside as a genuine Ford Door Handle component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 8C2Z-1526604-BD Handle, Outside is used with Ford E-150 Econoline, E-150, E-150 Club Wagon models. The original Ford part will bear the manufacturer part number: 8C2Z-1526604-BD and where it is made at Ford. It has the code: 26600.
This component is approximately 1.20 Pounds. The part 8C2Z1526604BD is available in New condition while meeting the standards of the product rating. The Handle Assembly - Door Outer; Exterior Door Handle belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 8C2Z-1526604-BD can be known as Handle Assembly - Door - Outer, and it replaces 8C2Z-1526604-BC, F2UZ-1526600-C, F5UZ-1526600-AAA. The inventory reference for this item is SKU: 8C2Z-1526604-BD. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.