Ford F8OZ7210CA
Shift Lever

The first step to fix the automatic transmission shift levers for the transaxle range with floor shift involves removing the center console. Start by detaching the shift cable together with the bracket from the automatic transmission shift levers of the transaxle range before taking out the parking brake release control motor. The first step is to disconnect the electrical connector and unscrew the screws to obtain the automatic transmission shift levers. Begin by positioning the transaxle range automatic transmission shift levers and follow with screw installation before reconnecting its electrical connector. Reinstall the parking brake release control motor then install the shift cable followed by the bracket and conclude with reassembly of the center console.

The first step for repairing or servicing the automatic transmission shifter requires removal of the center console. First detach both the shift cable and the bracket from the transaxle range automatic transmission shift lever before removing the parking brake release control motor. Start the automatic transmission shift lever removal by disconnecting the electrical connector before taking out screws. The first step for installation begins with placing the transaxle range automatic transmission shift lever in its final position while using screws to fasten it in place and ending with the reconnection of the electrical connector. The final installation steps require reinstallation of the parking brake release control motor followed by attaching the shift cable and bracket and finishing with center console assembly.

Take out the screws securing the lower instrument panel covering and remove both the upper and lower steering column shrouds.

The transaxle range selector lever pin, the transaxle range selector lever itself, and the transaxle range selector lever clip.