My Garage
Cart
Make sure this part fits

Ford F77Z-5K484-HA
Stabilizer Link, Rear

1993-2011 Ford Ranger F77Z5K484HA

Customer Questions & Expert Answers (10)
Ford F77Z-5K484-HA Stabilizer Link, Rear
  • Part Description
    Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
  • Base No.
    5K484
  • Position
    Rear
  • Replaces
    F37Z-5K484-B
  • Manufacturer
    Ford
Make sure this part fits
$41.59 MSRP: $67.09
You Save: $25.50 (39%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.5K484
    Manufacturer Part NumberF77Z-5K484-HA
    Part DescriptionLink; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
    Other NamesSuspension Stabilizer Bar Link; Stabilizer Bar Link
    Manufacturer Note276mm between center of bolt holes, 4x4 or 4X2 with extra havy duty suspension, FROM 3/1/97
    Item Dimensions1.6 x 2.4 x 12.5 inches
    Item Weight1.00 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ReplacesF37Z-5K484-B
    Require Quantity2
    ManufacturerFord
    SKUF77Z-5K484-HA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1993-2011 Ford RangerEdge, FX4, Splash, Sport, STX, Tremor, XL, XL Sport, XLT4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you verify if F77Z-5K484-HA is the right one for my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number F77Z-5K484-HA fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How do you remove the front stabilizer bar for the 2004 Ford Ranger? Posted by Customer
    A:
    Take out the front stabilizer bar by removing the four bolts and two brackets, then take out the stabilizer bar insulator.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the next step after removing the rear stabilizer bar link for the 2003 Ford Ranger? Posted by Customer
    A:
    Remove the rear stabilizer bar mounting bracket bolts and detach the brackets.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the final step to complete the installation for the 2003 Ford Ranger? Posted by Customer
    A:
    Reverse the removal procedure to complete the installation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be done after removing the components for the 2007 Ford Ranger? Posted by Customer
    A:
    Reverse the removal procedure to complete the installation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be done with the stabilizer bar bracket bolts for the 2006 Ford Ranger? Posted by Customer
    A:
    Discard the stabilizer bar bracket bolts.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be done if the stabilizer bar bracket bolts cannot be installed in the frame for the 2009 Ford Ranger? Posted by Customer
    A:
    Remove the weld nut and replace it with a flag nut (N807634-S441).
    Posted by FordPartsDeal Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be done after removing the wheel and tire assembly for the 2002 Ford Ranger? Posted by Customer
    A:
    Detach the front stabilizer bar link nuts from the front suspension lower arms.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the final step in removing the rear stabilizer bar for the 2005 Ford Ranger? Posted by Customer
    A:
    Remove the rear stabilizer bar.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be removed after the front stabilizer bar links for the 2008 Ford Ranger? Posted by Customer
    A:
    Remove the four stabilizer bar bracket bolts, the stabilizer bar, brackets, and bushings, discarding the stabilizer bar bracket bolts.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Sway Bar Link
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford F77Z-5K484-HA, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # F77Z-5K484-HA Stabilizer Link, Rear. It is sometimes referred to as Ford Sway Bar Link. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford F77Z5K484HA Stabilizer Link, Rear. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery