How to Service and Repair the Front Sway Bar Link on Ford Mustang?

Start the front sway bar link servicing work by hoisting the vehicle with neutral engagement and following these steps. It is essential to activate the holding feature before any efforts to remove or install sway bar link nuts since any boot seal turning could lead to damage. The initial step should be to remove the bottom sway bar link nut before installing a new one and applying torque to 115 Nm (85 lb-ft). When following this task you should disconnect the link from its position on the sway bar. The studs need protection with the holding feature during sway bar link upper nut removal or installation when you discard the old nut and tighten the new one to 115 Nm (85 lb-ft). The installation process ends by taking the link off the strut then following the inverse order of removal. New suspension components should match either their stated part number or an equivalent and you need to follow torque specifications during reassembly to preserve the system integrity.

How to service the Sway Bar Link on Ford Ranger?

Service of a sway bar link requires the vehicle to be in neutral position on a hoist setup. You should remove front sway bar link nuts and grommets before installing new ones which you should tighten to 35 Nm (26 lb-ft). The next step involves removing both front sway bar link studs and links. Disassemble the sway bar bracket bolts with four components including sway bar and brackets and bushings and throw away the sway bar bracket bolts. Administer torque value of 40 Nm (30 lb-ft) during new bolt installation. Surface detection of mating components and internal threads should include foreign debris removal as well as thread locking compound removal. The frame still allows sway bar bracket bolt installation but if it does not then remove the weld nut while adding a flag nut (N807634-S441). To finish the installation follow the reverse order of the removal process.

OEM Ford Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

143 Sway Bar Links found

View related parts
Ford Stabilizer Link Part Number: F57Z-5K483-EA
$23.07 MSRP: $31.39
You Save: $8.32 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link
- Manufacturer Note: 4x2, FROM 3/20/95
- Replaces: F2TZ-5K483-A
Fits the following Ford Models:
- Explorer | 1992-1994 | Eddie Bauer, Limited, Sport, XL, XLT | 6 Cyl 4.0 L GAS
- Ranger | 1992-1995 | Custom, S, Splash, Sport, STX, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Stabilizer Link, Rear Part Number: CR3Z-5C488-Q
$62.49 MSRP: $104.91
You Save: $42.42 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar, Rear Suspension Stabilizer Bar Link Kit, Sway Bar Link; Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear
- Replaces: CR3Z-5C488-L, CR3Z-5C488-F, MEF-222, MEF-264
Fits the following Ford Models:
- Mustang | 2012-2014 | Base, Boss 302, GT, Shelby GT500 | 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Stabilizer Link Part Number: HC3Z-5K484-C
$61.60 MSRP: $97.82
You Save: $36.22 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
- Manufacturer Note: RH/LH
Fits the following Ford Models:
- F-250 Super Duty | 2017-2024 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
- F-350 Super Duty | 2017-2024 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford Stabilizer Link, Front Driver Side Part Number: 3F1Z-5K483-A
$30.14 MSRP: $41.01
You Save: $10.87 (27%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front Left; Suspension Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link; Link Assembly; Link End
- Position: Front Driver Side
- Replaces: MEF-175, 3F1Z-5K483-AA
Fits the following Ford Models:
- Taurus | 2000-2007 | LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Link Part Number: HC3Z-5K484-B
$63.55 MSRP: $100.91
You Save: $37.36 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
- Manufacturer Note: RH/LH
Fits the following Ford Models:
- F-250 Super Duty | 2017-2022 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
- F-350 Super Duty | 2017-2022 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford Stabilizer Link, Front Part Number: 6W1Z-5K484-AA
$61.66 MSRP: $101.45
You Save: $39.79 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Front Suspension Stabilizer Bar Link Kit; Sway Bar Link; Link Kit
- Manufacturer Note: FROM 08/03/05
- Position: Front
- Replaces: 5W1Z-5K484-A
Fits the following Ford Models:
- Crown Victoria | 2003-2011 | Base, Fleet, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Link Part Number: HC3Z-5K484-A
$59.56 MSRP: $98.00
You Save: $38.44 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
- Manufacturer Note: RH/LH
Fits the following Ford Models:
- F-250 Super Duty | 2017-2022 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
- F-350 Super Duty | 2017-2023 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford Stabilizer Link, Front Driver Side Part Number: 1C3Z-5K483-BB
$64.97 MSRP: $106.91
You Save: $41.94 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front Left; Sway Bar Link Kit; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front Driver Side
- Replaces: 4C3Z-5K483-BC, YC3Z-5K483-AC
Fits the following Ford Models:
- Excursion | 2004-2005, 2000-2002 | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
- F-250 Super Duty | 2000-2004 | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
- F-350 Super Duty | 2000-2004 | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View More
View related parts
Ford Stabilizer Link, Front Part Number: 7C3Z-5K483-A
$63.68 MSRP: $106.91
You Save: $43.23 (41%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front
Fits the following Ford Models:
- F-250 Super Duty | 2008-2010 | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
- F-350 Super Duty | 2008-2010 | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
View related parts
Ford Stabilizer Link, Front Passenger Side Part Number: 1C3Z-5K483-BA
$87.85 MSRP: $144.55
You Save: $56.70 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Link; Front Right Suspension Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front Passenger Side
- Replaces: 4C3Z-5K483-BB, YC3Z-5K483-AB
Fits the following Ford Models:
- Excursion | 2004-2005, 2000-2002 | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
- F-250 Super Duty | 2000-2004 | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
- F-350 Super Duty | 2000-2004 | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View More
View related parts
Ford Stabilizer Link, Front Passenger Side Part Number: GG1Z-5K484-A
$48.89 MSRP: $77.64
You Save: $28.75 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Front Right Suspension Stabilizer Bar Link Kit; Sway Bar Link
- Position: Front Passenger Side
- Replaces: AA5Z-5K484-A, MEF-161
Fits the following Ford Models:
- Flex | 2010-2019 | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
- Police Interceptor Sedan | 2013-2019 | Base | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L GAS
- Special Service Police Sedan | 2014-2018 | Base | 4 Cyl 2.0 L GAS
- Taurus | 2010-2019 | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View More
View related parts
Ford Stabilizer Link, Front Part Number: YC3Z-5K483-AA
$50.06 MSRP: $82.36
You Save: $32.30 (40%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Manufacturer Note: 2WD
- Position: Front
- Replaces: F81Z-5K483-AA
Fits the following Ford Models:
- E-150 | 2005-2007 | Base, Chateau, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
- E-250 | 2005-2007 | Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
- E-350 Super Duty | 2005-2007 | Base, Chateau, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
- Excursion | 2000-2005 | Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
- F-250 | 1999 | Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
- F-250 Super Duty | 1999-2024 | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.3 L GAS
- F-350 Super Duty | 1999-2024 | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.3 L GAS
View More
View related parts
Ford Stabilizer Link, Front Driver Side Part Number: GG1Z-5K483-A
$50.28 MSRP: $82.73
You Save: $32.45 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front Left; Sway Bar Link Kit
- Position: Front Driver Side
- Replaces: MEF-162
Fits the following Ford Models:
- Flex | 2010-2019 | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
- Police Interceptor Sedan | 2013-2019 | Base | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L GAS
- Special Service Police Sedan | 2014-2018 | Base | 4 Cyl 2.0 L GAS
- Taurus | 2010-2019 | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View More
View related parts
Ford Stabilizer Link, Rear Part Number: CR3Z-5C488-J
$35.67 MSRP: $49.34
You Save: $13.67 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar, Rear Suspension Stabilizer Bar Link Kit, Sway Bar Link; Link
- Position: Rear
- Replaces: CR3Z-5C488-E
Fits the following Ford Models:
- Mustang | 2012-2013 | Boss 302 | 8 Cyl 5.0 L GAS
View related parts
Ford Stabilizer Link, Rear Part Number: 7F9Z-5K484-S
$31.24 MSRP: $42.51
You Save: $11.27 (27%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear
- Replaces: 5F9Z-5K484-AS
Fits the following Ford Models:
- Five Hundred | 2005-2007 | Limited, SE, SEL | 6 Cyl 3.0 L GAS
- Freestyle | 2005-2007 | Limited, SE, SEL | 6 Cyl 3.0 L GAS
- Taurus | 2008-2009 | Limited, SE, SEL | 6 Cyl 3.5 L GAS
- Taurus X | 2008-2009 | Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS
View More
View related parts
Ford Stabilizer Link Part Number: F4DZ-5K484-A
$115.88 MSRP: $194.55
You Save: $78.67 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link
- Manufacturer Note: RH & LH
Fits the following Ford Models:
- Taurus | 1986-1995 | GL, L, LX, MT5, SE, SHO | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Stabilizer Link, Front Passenger Side Part Number: 7F9Z-5K484-R
$38.29 MSRP: $62.55
You Save: $24.26 (39%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit, Front Left/Right.; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front Passenger Side
- Replaces: 5F9Z-5K484-AR
Fits the following Ford Models:
- Five Hundred | 2005-2007 | Limited, SE, SEL | 6 Cyl 3.0 L GAS
- Freestyle | 2005-2007 | Limited, SE, SEL | 6 Cyl 3.0 L GAS
- Taurus | 2008-2009 | Limited, SE, SEL | 6 Cyl 3.5 L GAS
- Taurus X | 2008-2009 | Eddie Bauer, Limited, SEL | 6 Cyl 3.5 L GAS
View More
View related parts
Ford Stabilizer Link, Rear Part Number: F77Z-5K484-HA
$31.21 MSRP: $50.36
You Save: $19.15 (39%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Manufacturer Note: 276mm between center of bolt holes, 4x4 or 4X2 with extra havy duty suspension, FROM 3/1/97
- Position: Rear
- Replaces: F37Z-5K484-B
Fits the following Ford Models:
- Ranger | 1993-2011 | Edge, FX4, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Stabilizer Link, Front Part Number: 5W4Z-5K483-AA
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front; Rod/Strut, Stabiliser; Sway Bar Link; Suspension Stabilizer Bar Link
- Position: Front
- Replaces: 1W4Z-5K484-AA
Fits the following Ford Models:
- Thunderbird | 2002-2005 | 50th Anniversary Edition, Base, James Bond Edition, Neiman Marcus, Pacific Coast Roadster | 8 Cyl 3.9 L GAS
View related parts
Ford Stabilizer Link, Rear Part Number: BR3Z-5C488-B
Product Specifications
- Other Name: Link - Stabilizer Bar, Rear Suspension Stabilizer Bar Link Kit, Sway Bar Link; Link
- Position: Rear
- Replaces: AR3Z-5C488-A
Fits the following Ford Models:
- Mustang | 2010-2011 | Base, GT, Shelby GT500 | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS

| Page 1 of 8 |Next >

1-20 of 143 Results

Ford Sway Bar Link

OEM Sway Bar Link boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Sway Bar Link with long life and a perfect fit. Come to our website and find genuine Ford parts. We keep a wide inventory of OEM parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Sway Bar Link Parts and Q&A

Stabilizer Link, Front
8R3Z-5K483-A
Q: How to Service and Repair the Front Sway Bar Link on Ford Mustang?
A:
Start the front sway bar link servicing work by hoisting the vehicle with neutral engagement and following these steps. It is essential to activate the holding feature before any efforts to remove or install sway bar link nuts since any boot seal turning could lead to damage. The initial step should be to remove the bottom sway bar link nut before installing a new one and applying torque to 115 Nm (85 lb-ft). When following this task you should disconnect the link from its position on the sway bar. The studs need protection with the holding feature during sway bar link upper nut removal or installation when you discard the old nut and tighten the new one to 115 Nm (85 lb-ft). The installation process ends by taking the link off the strut then following the inverse order of removal. New suspension components should match either their stated part number or an equivalent and you need to follow torque specifications during reassembly to preserve the system integrity.
Stabilizer Link, Front
2L2Z-5K483-AA
Q: How to service the Sway Bar Link on Ford Ranger?
A:
Service of a sway bar link requires the vehicle to be in neutral position on a hoist setup. You should remove front sway bar link nuts and grommets before installing new ones which you should tighten to 35 Nm (26 lb-ft). The next step involves removing both front sway bar link studs and links. Disassemble the sway bar bracket bolts with four components including sway bar and brackets and bushings and throw away the sway bar bracket bolts. Administer torque value of 40 Nm (30 lb-ft) during new bolt installation. Surface detection of mating components and internal threads should include foreign debris removal as well as thread locking compound removal. The frame still allows sway bar bracket bolt installation but if it does not then remove the weld nut while adding a flag nut (N807634-S441). To finish the installation follow the reverse order of the removal process.