My Garage
Cart
Make sure this part fits

Ford 8R3Z-5230-F
Muffler, Front Passenger Side

2005-2009 Ford Mustang 8R3Z5230F

Customer Questions & Expert Answers (11)
Ford 8R3Z-5230-F Muffler, Front Passenger Side
  • Part Description
    Muffler Assembly - Front; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit
  • Base No.
    5230A
  • Position
    Front Passenger Side
  • Replaces
    4R3Z-5230-RM
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.5230A
    Manufacturer Part Number8R3Z-5230-F
    Part DescriptionMuffler Assembly - Front; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit
    Item Weight16.60 Pounds
    PositionFront Passenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces4R3Z-5230-RM
    ManufacturerFord
    SKU8R3Z-5230-F
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2009 Ford MustangBullitt, GT, Shelby GT8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Will this 8R3Z-5230-F work in my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 8R3Z-5230-F fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How is the muffler removed for the 2005 Ford Mustang? Posted by Customer
    A:
    Remove the muffler by sliding it out of the muffler isolators.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Muffler
    Q:
    How should the exhaust clamp be installed for the 2008 Ford Mustang? Posted by Customer
    A:
    Ensure it is installed up to, but not over, the bottom of the notches.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Exhaust Pipe
    Q:
    What is the next step after installing the intermediate pipe for the 2006 Ford Mustang? Posted by Customer
    A:
    Place the new exhaust coupler over the intermediate pipe and position it to the catalytic converter, sliding the coupler into place until the converter button is seated in the intermediate pipe notch.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Muffler
    Q:
    What should be done to ensure the intermediate pipe is correctly inserted into the coupler for the 2007 Ford Mustang? Posted by Customer
    A:
    Push the muffler forward to fully seat the pipe in the coupler and verify that the knurled section is at the coupler lip.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Exhaust Pipe
    Q:
    How do you disconnect the muffler from the intermediate pipe for the 2009 Ford Mustang? Posted by Customer
    A:
    Loosen the muffler clamp and disconnect the muffler from the intermediate pipe, then remove the intermediate pipe from the vehicle.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Muffler
    Q:
    What is the torque specification for tightening the isolators during installation for the 2008 Ford Mustang? Posted by Customer
    A:
    Tighten the isolators to 25 Nm (18 lb-ft).
    Posted by FordPartsDeal Specialist
    See expert answers on similar Muffler
    Q:
    What is the torque specification for tightening the exhaust coupler nuts for the 2009 Ford Mustang? Posted by Customer
    A:
    Tighten the exhaust coupler nuts to 48 Nm (35 lb-ft), alternating the tightening in increments of 10 Nm (89 lb-in).
    Posted by FordPartsDeal Specialist
    See expert answers on similar Exhaust Pipe
    Q:
    How should the exhaust coupler nuts be tightened for the 2006 Ford Mustang? Posted by Customer
    A:
    Tighten the exhaust coupler nuts, alternating the tightening in increments of 10 Nm (89 inch lbs.) until reaching a final torque of 54 Nm (40 ft. lbs.).
    Posted by FordPartsDeal Specialist
    See expert answers on similar Exhaust Pipe
    Q:
    What is the first step to service the muffler for the 2007 Ford Mustang? Posted by Customer
    A:
    Ensure the vehicle is in NEUTRAL and positioned on a hoist.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Muffler
    Q:
    How do you install the muffler for the 2005 Ford Mustang? Posted by Customer
    A:
    Slide the muffler into the isolators and install a new exhaust clamp.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Exhaust Pipe
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford 8R3Z-5230-F, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # 8R3Z-5230-F Muffler, Front Passenger Side. It is sometimes referred to as Ford Exhaust Pipe, Ford Muffler. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford 8R3Z5230F Muffler, Front Passenger Side. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery