Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Ford 1U2Z-2V001-MA
Front Pads

2005-2007 Ford E-150 1U2Z2V001MA

Customer Questions & Expert Answers (5)
Ford 1U2Z-2V001-MA Front Pads
  • Part Description
    Pad; Brake Pads
  • Base No.
    2V001
  • Manufacturer
    Ford
Make sure this part fits
$7.89 MSRP: $10.92
You Save: $3.03 (28%)
Ships in 1-2 Business Days
1
ADD TO CART

  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Ford E-150Base, Chateau, XL, XLT8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is 1U2Z-2V001-MA the part I need for my vehicle? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 1U2Z-2V001-MA fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the front brake pads on Ford E-150? Posted by Customer
    A:
    The repair and servicing of front brake pads in E-150, E-250, E-350 and E-450 vehicles should start with approved DOT 3 brake fluid to avoid damaging brake system components. Verify the master cylinder reservoir brake fluid level then you can make necessary adjustments. The front brake hose requires speed sensor wiring release before setting the vehicle on a hoist in NEUTRAL position. Secure the brake caliper with mechanic's wire and eliminate the two caliper bolts before placing the caliper to the side without letting it dangle from the flexible hose. The brake pad retaining spring removal plus two brake pads removal process requires the disposal of retraction clips on E-150 vehicles. During inspection check if brake pads need replacement because lining thickness exceeds recommended distance from brake metal support plate. Replace brake pads and discs in entire axle pair. The brake caliper must be inspected for leaks because caliper disassembly becomes necessary when leaks are detected. The brake pad installation process requires new hardware from the kit as well as four new retracting clips that need installation alongside caliper piston compression with a suitable tool and a worn pad. Install brake pads into the caliper and place retaining springs into E-150 when the rubber caliper sleeve boots contain caliper grease. After attaching the speed sensor wiring to the front brake hose ensure that the bottom caliper bolt receives the first tightening before the top and ensure caliper pin boots are properly seated. Feed the brake caliper into its position while installing its two bolts with proper torque settings of 32 Nm (24 ft. lbs.) for E-150 and 31 Nm (23 ft. lbs.) for E-250, E-350, and E-450. Regular testing of the brakes should follow a brake fluid refill with clean DOT 3 fluid into the master cylinder reservoir.
    Posted by FordPartsDeal Specialist
    Q:
    What steps follow the removal of the caliper for the 2005 Ford E-150? Posted by Customer
    A:
    Remove the brake pad clips and the brake pads, then measure the rear brake disc thickness and install a new rear brake disc if it does not meet specifications.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Pads
    Q:
    What type of brake fluid should be used for the 2007 Ford E-150? Posted by Customer
    A:
    Always use approved DOT 3 motor vehicle brake fluid to prevent permanent damage to brake components.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Pads
    Q:
    What should be avoided to prevent damage during the brake service for the 2006 Ford E-150? Posted by Customer
    A:
    Allowing the caliper to hang from the brake hose.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Pads
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Front Pads 1U2Z-2V001-MA Designed for Proper Fit and Performance

The Ford part 1U2Z-2V001-MA Front Pads as a genuine Ford Brake Pads component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 1U2Z-2V001-MA Front Pads is used with Ford E-150 models. The original Ford part will bear the manufacturer part number: 1U2Z-2V001-MA and where it is made at Ford. It has the code: 2V001.
This component has dimensions of 2.6 x 4.0 x 4.6 inches and its weight is approximately 2.90 Pounds. The part 1U2Z2V001MA is available in New condition while meeting the standards of the product rating. The Pad; Brake Pads belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 1U2Z-2V001-MA can be vital. The inventory reference for this item is SKU: 1U2Z-2V001-MA. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.