Ford 2M5Z-9034-BA
Filler Neck

Service and repair of the fuel filler hose begins with removing the right-hand rear wheel nuts while disconnecting the battery ground cable. The processing begins by taking off the fuel filler cap followed by vehicle lift and support before the technician removes the right-hand rear wheel with its splash shield. The service requires removing both vent pipes and filler pipe from the fuel tank while protecting the filler pipes from damage by avoiding sharp tools. Keep track of how the retaining clamp and clip should be positioned when reinstalling. You should disconnect the canister vent solenoid tube while paying attention to keeping it damage-free before unscrewing the two bolts on the fuel filler pipe. To install the system require reverse steps of removal while putting back the fuel filler and vent pipe retaining clamp and clips into their original placement. The final step includes conducting an evaporative emission system leak test for proper system functionality assessment.

Take off the tie straps and the two bolts.

Raise and support the vehicle to remove the right-hand rear wheel and splash shield.

Disconnect the canister vent solenoid tube, ensuring not to damage the solenoid.

No, a new filler pipe assembly should be installed as needed.